Monkmakes SKU00062 - The MonkMakes Sensor Board for micro:bit can be used to measure sound levels, temperature and light levels.
|
BBC MB 46122
1 Item Items
In stock
Warning: Last items in stock!
Availability date:
Monkmakes SKU00062 - The MonkMakes Sensor Board for micro:bit can be used to measure sound levels, temperature and light levels.
The MonkMakes Sensor Board allows you to detect sound levels, temperature and light levels. It features ring pad connectors for use with crocodile clips make it easy to connect to the board to a microbit.
It senses sound level with a MEMs, which is a microphone on a chip that also features a pre-amplifier circuit. You can then use the plot bar graph block in the Microsoft MakeCode editor to display the result on the microbits LED matrix.
The temperature output from the board is a voltage that indicates the temperature. This is then measured using an analog input on the micro:bit. If you want your temperatures in Fahrenheit, then multiply the temperature in degrees C by 9, divide the result by 5 and then add 32.
The light sensor uses a photo-transistor to measure the light level and produces an output voltage that increases as the light level increases.
It has 3V and GND connectors on both sides of the board which make it possible to power another board, such as the Relay Board or Powered Speaker Board.
click for more info | |
Manufacturer | |
Manufacturer's model | MonkMakes Sensor Board |
Distributors code | 46122 |
Measures | 63 x 57 x 1,6 mm |
Compatible | BBC micro:bit V1 & V2 |
4,80 €
Feetech FS90R - 360° Continuous Rotation...
12,01 €
1,60 €
Elecrow BBC DTS03558C - Crowtail Base Shield...
10,73 €
PeakTech® P 6225 A - DC Switching Mode Power...
105,00 €
12,90 €
3,25 €
Raspberry Pi 4 Model B SBC with four gigabytes...
89,90 €
1,66 €
1,80 €