Automaatio

Valmistajat

Erikoistarjoukset

ArduiTOUCH ESP RAKENNUSSARJA

ARDUITOUCH ESP

3 kappaletta

Varastossa

Valmistajan kotisivu

63,24 €

ESP8266 & ESP32 top wall mounting touchscreen set.

The popular ESP8266 and ESP32 based modules are used in many IoT applications like home automation, smart lighting, smart metering, remote control etc. You can find a lot of ready to use projects in the Internet. ArduiTouch is a touchscreen enclosure set especially for top wall mounting for the well-known NodeMCU and Wemos D1 Mini boards based on  ESP8266 and ESP32 platform.

ArduiTouch come in a nice enclosure for wall mounting together with a 2.4 inch resistive touch screen and enables you to mount your project permanent in your living room, corridor or other exposed places.

Touchscreen

2.4 inch touchscreen with integrated  ILI9341 display controller, communication via SPI. Touch controller Type XPT2046 and resitive touch.

Compatibility

ArduiTouch ESP can be used together with NodeMCU Amica (ESP8266), Wemos D1 Mini (with some resitrictions with  Wemos Mini D1 ESP32 too) and ESP32 NodeMCU.

Vertical and horizontal mounting

Depending from your project and your software you can mount the enclosure set vertical or horizontal directely on the wall or in front of a flush wall mount box.

Easy connection

A removable terminal block makes installion easier. The pcbs are mounted on the enclosure allowing a rapid substitution of the devices when needed and facilitating the assembling/ disassembling of the enclosure.

Power Supply

The ArduiTouch pcb come with an integrated switching regulator for voltages from 9 to 35V DC. You can connect the power supply via the terminal or an optional DC socket.

Acoustics

The integrated piezo beeper (resonance frequency 4kHz)  can be used to generate acoustic feedback, acknowldge tones or melodies.

Own circuits

A small breadboard area in the top of the pcb can be used for own extensions. 4 poles of the terminal are connected together with some GPIOs and the voltages with solder joints beside the breadboard.

Toimitus

Tämä malli on "Extended+ / All parts including touch screen and NodeMCU Amica V2"

  • valkoinen seinäkotelo 120 x 80 x 33 mm
  • graafinen TFT näyttö 240x320 2,4" resistiivisellä kostetuspinnalla
  • osat jänniteregulaattoria varten
  • osat äänimerkkiä varten
  • piirikortti protoalueella
  • ruuvitarvikkeita
  • ESP8266 NodeMCU V2 Amica

Huom! Toimitetaan itsekoottavana sarjana.

Valmistajan sivuilla esimerkkikoodeja mm. Weather Station Example, Thermostat Example, Social Tracker Example

Tätä tuotetta ostaneet ostivat myös:

 
Tuo ostoskori Excel-tiedostosta (.xls) jossa on tuotekoodit ja määrät