RISC-V

Valmistajat

Erikoistarjoukset

Sipeed Maixduino Kit for RISC-V AI+IoT

SEEED 110110044

2 kappaletta

Varastossa

Huom: Viimeinen tuote varastossa!

Valmistajan kotisivu

58,38 €

Seeed Studio 110110044 - Sipeed Maixduino Kit for RISC-V AI + IoT, Arduino Uno form factor devboard with camera and 2.4" TFT display

PRODUCT DETAILS

Based on MAIX Module, the Maixduino is a RISC-V 64 development board for AI + IoT applications. Different with other Sipeed MAIX dev. boards, Maixduino was designed in an Arduino Uno form factor, with ESP32 module on board together with MAIX AI module.

Features

  • CPU: RISC-V Dual Core 64bit, with FPU; 400MHz neural network processor
  • QVGA@60FPS/VGA@30FPS image identification
  • Onboard ESP32 module support 2.4G 802.11. b/g/n and Bluetooth 4.2
  • Arduino Uno form factor, Arduino compatible interface
  • Onboard omnidirectional I2S digital output MEMS Microphone
  • 24P 0.5mm FPC connector for DVP Camera
  • 8bit MCU LCD 24P 0.5mm FPC connector
  • Support self-elastic micro SD card holder
  • Reset and boot button; 3W DAC+PA Audio output
  • Just connect the USB Type-C cable to complete the download
  • Machine vision based on convolutional neural network
  • High performance microphone array processor for machine hearing
  • Support MaixPy IDE, Arduino IDE, OpenMV IDE, and PlatformIO IDE
  • Support Tiny-Yolo, Mobilenet and TensorFlow Lite for deep learning

MAIX is Sipeed' s purpose-built product series designed to run AI at the edge. Move AI models from cloud down to devices on the edge of the network where they can run faster, at lower cost, and with greater privacy.

MAIX isn't just a hardware solution, it combines custom hardware, open software, and state-of-the-art AI algorithms. Different kinds of dev. boards, kits, peripherals as well as wide compatibility enable rapid and agile prototype development, make AIoT projects much easier. And thanks to MAIX' s performance, small footprint, low power, and low cost, it enables the broad deployment of high-quality Edge AI.

Applications

  •  Smart Home applications like robot cleaners, smart speakers, electronic door locks, household monitoring etc.
  •  Medical Industry applications like Auxiliary diagnosis and treatment, medical image recognition, emergency alarm etc.
  •  Smart Industry applications like industrial machinery, intelligent sorting, monitoring of electrical equipment, etc.
  •  Education applications like educational robots, intelligent interactive platforms, educational efficiency inspection, etc.
  •  Agriculture applications like agricultural monitoring, pest and disease monitoring, automated control, etc.

Specification

Master moduleSipeed MAIX-I AIoT module
Power inputUSB Type-C
DC-DC step-down circuit:support 6-12V input;Provide 5V 1.2A output
Micro SD card(TF card) slotSupport Self-elastic card holder
Onboard MEMS microphoneMSM261S4030H0 is an omnidirectional, Bottom-ported, I2S digital output MEMS Microphone. It has high performance and Reliability.
DVP Camera interface24P 0.5mm FPC connector
LCD connector8bit MCU LCD 24P 0.5mm FPC connector
Audio outputDAC+PA:
TM8211:16 bit dynamic range;Low harmonic distortion
NS4150:3W output power;Up to 90% efficiency;
ESP32 moduleSupport 2.4G 802.11.b/g/n
802.11 n (2.4 GHz) speeds up to 150 Mbps
Bluetooth v4.2 full standard, including traditional Bluetooth (BR/EDR) and Bluetooth Low Energy (BLE)
Supply voltage of external power supply4.8V ~ 5.2V
Supply current of external power supply>600mA
Temperature rise<30K
Range of working temperature-30℃ ~ 85℃
MCU: ESP8285Tensilica L106 32-bit MCU
Wireless Standard802.11 b/g/n
Frequency Range2400Mhz - 2483.5Mhz
TX Power(Conduction test)

802.11.b : +15dBm
802.11.g : +10dBm(54Mbps)
802.11.n : +10dBm (65Mbps)

Antenna ConnectorIPEX 3.0x3.0mm
Wi-Fi modeStation/SoftAP/SoftAP+Station

Part List

  • 1 x Maixduino dev. board
  • 1 x GC0328 camera module
  • 1 x 2.4 inch TFT Display

Links

Klikkaa tarkemmat tiedot
ValmistajaSeeed Studio
Valmistajan malli110110044
ProsessoriRISC-V

Tätä tuotetta ostaneet ostivat myös:

 
Tuo ostoskori Excel-tiedostosta (.xls) jossa on tuotekoodit ja määrät