Elecrow CT0068BSR - Crowtail Base Shield for Raspberry Pi 2.1
|
RPI-CT0068BSR
Tällä hetkellä ei saatavilla
Huom: Viimeinen tuote varastossa!
Tulossa:
Elecrow CT0068BSR - Crowtail Base Shield for Raspberry Pi 2.1
This is a Crowtail base shield for Raspberry Pi with UART/I2C/Analog/Digital interface. All the Crowtail modules can be plugged onto Raspberry Pi through this base shield. Moreover, this shield has an on-board ADC chip so that analog output modules can be used on Raspberry Pi. The ADC chip used is MCP3008. It talks to Raspberry Pi using SPI interface.
| Klikkaa tarkemmat tiedot | |
| Valmistaja | Elecrow |
| Valmistajan malli | CT0068BSR |
| Mitat | 65 x 56 x 18 mm |
| Yhteensopiva | Raspberry Pi |
Elecrow CT008315S - Crowtail PP Plastic Float...
10,12 €
21,84 €
Mean Well LPH-18-12 - Vakiojännite...
15,50 €
Elecrow CT0008RE - Crowtail- Relay 2.0
5,11 €
Elecrow CRT03349R - Crowtail- SPDT Relay V2.0
8,92 €
8,00 €
39,90 €
Elecrow CRT10251D - Crowtail- DHT20
9,20 €
Elecrow CRT00549L - Crowtail- Luminance Sensor 2.0
8,76 €
Elecrow CRT00536L - Crowtail- Bright LED 2.0
6,00 €