Seeed Studio 101020063 - Grove - Sound Sensor/ Noise Detector for Arduino
|
Rigol DG822 Pro - 20MHz 2-Kanavainen...
SEEED-101020063
6 kappale kappaletta
Varastossa
Huom: Viimeinen tuote varastossa!
Tulossa:
Seeed Studio 101020063 - Grove - Sound Sensor/ Noise Detector for Arduino
The Grove - Loudness Sensor is designed to detect the loudness of environmental sound. Based on amplifier LM2904 and a built-in microphone, it amplifies and filters the high-frequency signal that received from the microphone, and outputs a positive envelope. This will make for Arduino's signal acquisition. The output value depends on the level of the sound input. In order to avoid unnecessary signal disturbances, the input signal will go through two times filtering inside the module. Lastly, there is a screw potentiometer that enables manual adjustments to the output gain.
Dimensions | 24mm x20mm x9.8mm |
Weight | G.W 9g |
Battery | Exclude |
Voltage | 3.5~10 VDC |
Working Frequency | 50~2000 Hz |
Sensitivity | -48~66 dB |
Signal-to-noise Ratio | >58 dB |
Output Signal range | Analog Signal (0-1023) |
Grove - Loudness Sensor | 1 |
Klikkaa tarkemmat tiedot | |
Valmistaja | Seeed Studio |
Valmistajan malli | 101020063 |
Mitat | 24 x 20 x 9.8 mm |
Paino | 9g |
1,20 €
Seeed Studio 101020023 - Grove - Sound Sensor...
9,50 €
0,80 €
13,86 €
Kemo S007 - harrastuskäyttöön lajitelma...
6,00 €
140 kpl leipälautailuun sopivia eripituisia...
10,90 €
25,49 €
3,26 €
WiFi UNO Based ESP32
27,29 €
Raspberry Pi Camera Module 3 Wide sisältää...
60,69 €