Grove

Valmistajat

Erikoistarjoukset

Grove RELEKORTTI 4-CH Solid State

SEEED 103020135

Tällä hetkellä ei saatavilla

Valmistajan kotisivu

47,90 €

Seeed Studio 103020135 - Grove - 4-Channel Solid State Relay

PRODUCT DETAILS

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors, which provide a much faster switching speed than the mechanical relays. The Grove - 8-Channel Solid State Relay is based on the high-quality G3MC202P module, which allows you to use a 5VDC to control MAX. 240VAC. With the help of Grove in

terface, it becomes very convenient to use the SSR with your arduino.

Seeed Studio use an on-board STM32F030F4P6 to control the channels separately. The command from Arduino or other boards is transmit via the I2C interface, the on-board STM32F030F4P6 will parse the command, so that you can control the switch you want.

1*Please be careful when working with high voltage AC load, please do not operate with power on.

2*This relay only works with AC load, if you use DC load, once the relay is turned on, it will always stay on.

3*Due to the leakage current, we do not recommend you to use this relay with low power appliance.

Features

  • Low power consumption.

  • Zero Cross

  • Long lasting.

  • Optional I2c address.

  • Eight-channel independent control..

  • Advantages over mechanical relays:

    1-Solid-state relays have much faster switching speeds compared with electromechanical relays, and have no physical contacts to wear out.

    2-Totally silent operation.

    3-No physical contacts means no sparking, allows it to be used in explosive environments, where it is critical that no spark is generated during switching.

    4-Increased lifetime, even if it is activated many times, as there are no moving parts to wear and no contacts to pit or build up carbon.

    5-Compact, thin-profile SSR of monoblock construction with an all-in-one lead frame incorporates a PCB, terminals and heat sink, which is much smaller than mechanical relays, and can integrate more channels.

  • Disadvantages:

    1-When closed, higher resistance (generating heat), and increased electrical noise.

    2-When open, lower resistance, and reverse leakage current.

    3-Only works for AC laod

Typical Applications

  • Operations that require low-latency switching, e.g. stage light control.

  • Devices that require high stability, e.g. medical devices, traffic signals.

  • Situations that require explosion-proof, anticorrosion, moisture-proof, e.g. coal, chemical industries.

Technical details

Dimensions60mm x40mm x25mm
WeightG.W 151g
BatteryExclude
Operating Input Voltage4~6V
Rated Input Voltage5V
Load Voltage Range75 to 264 VAC 50/60 Hz
Rated Load Voltage100 to 240 VAC 50/60 Hz
Load Current0.1 to 2 A
Leakage Current1.5 mA max. (at 200 VAC)
Insulation Resistance1,000 MΩ min. (at 500 VDC)
Operating Temperature-30°C to 80°C (with no icing or condensation)
Operating Humidity45% to 85%RH
Zero Crosssupport
CertificationUL / CSA

Part List

Grove - 4-Channel Solid State Relay1
Grove Cable1
A set of Acrylic Shell1

Links

Klikkaa tarkemmat tiedot
Mitat60 x 40 x 25 mm
Paino151g
Kanavat4
 
Tuo ostoskori Excel-tiedostosta (.xls) jossa on tuotekoodit ja määrät