Elecrow CT010219V - Crowtail- Voltage Sensor 2.0
|
ECT CT010219V
4 kappale kappaletta
Varastossa
Huom: Viimeinen tuote varastossa!
Tulossa:
Elecrow CT010219V - Crowtail- Voltage Sensor 2.0
The Crowtail- Voltage Sensor module designed on the basis of the input voltage is not greater than 5 V x 5 = 25 V (if use 3.3 V system, the input voltage is not greater than 3.3 Vx5 = 16.5 V).Because the Aduino using AVR chip for 10 AD, so this module simulation resolution of 0.00489 V (5 V / 1023), so the voltage detecting module minimum input voltage of 0.00489 V * 5 = 0.02445 V.
Klikkaa tarkemmat tiedot | |
Valmistaja | Elecrow |
Valmistajan malli | CT010219V |
Mitat | 20.0 x 20.0 x 12.0 mm |
Elecrow CT0009RT - Crowtail- RTC 2.0
6,70 €
2,24 €
Kemo S001 - harrastuskäyttöön pussillinen...
4,20 €
Joy-IT RB-StromPI3BAT - Battery Unit for StromPI 3
50,43 €
LOW ESR Elektrolyyttikondensaattori 10µF 50V,...
0,47 €
Joy-IT SBC-BUCK04-5V - pölytiivis ja...
18,13 €
Kemo G081N - musta muovikotelo 120 x 70 x 35 mm.
4,87 €
BJT NPN 75V 0,8A 0,5W TO92
0,26 €
0,40 €
7,83 €