Raspberry Pi Debug Probe - Plug-and-play, USB to serial-debug & UART, 3-pin debug connector, Multiple debug platform supported
|
RPI RPDB
1 kappale kappaletta
Varastossa
Huom: Viimeinen tuote varastossa!
Tulossa:
Raspberry Pi Debug Probe - Plug-and-play, USB to serial-debug & UART, 3-pin debug connector, Multiple debug platform supported
Raspberry Pi Debug Probe is a complete plug-and-play interface debug solution perfect for Raspberry Pi Pico, XIAO RP2040, other RP2040-based microcontrollers, and microprocessor-based platforms. It bridges the USB interface to a dedicated serial debug interface and industry-standard UART interface, both of which use a small, keyed, 3-pin debug connector, published for the next standard.
It applies small, keyed, 3-pin debug connectors, which is designed to work with a single unidirectional clock pin and a bidirectional data I/O pin. This arrangement can support ARM’s Serial Wire Debug (SWD) or things like cJTAG, for example.
It bridges the USB interface to a dedicated serial debug interface and industry-standard UART interface. While it has been designed primarily for use with Raspberry Pi debug targets, the Debug Probe provides standard CMSIS-DAP debug and UART interfaces over USB. That is, it can be used to debug other targets, or simply as a cost-effective USB-to-UART cable.
Raspberry Pi Debug Probe | x1 |
Plastic Case | x1 |
USB Cable | x1 |
Debug Cable(3-pin Debug to 3-pin Debug、3-pin Debug to 0.1-inch Header(Female)、3-pin Debug to 0.1-inch Header(Male)) | x3 |
Klikkaa tarkemmat tiedot | |
Mitat | 32 x 22 mm |
Yhteensopiva | Raspberry Pi Pico |
Seeed Studio 102010448 - Seeed XIAO BLE...
20,36 €
15,30 €
12,10 €
7,40 €
Elecrow RDR02805D - ULN2003 Stepper Motor Driver
3,35 €
3,30 €
22,77 €
Kemo S106 - harrastuskäyttöön lajitelma...
7,30 €
0,14 €
Raspberry Pi Pico W on uusi...
15,40 €