No products
Filter by
-
Rigol DP932E 198W POWER SUPPLY 2x 0-30V/3A, 0-6V/3A
Rigol DP932E - three-channel...
425,63 € -15% 500,75 €
Arduino compatible Shields and addon boards.
Arduino shields There are 69 products.
Arduino compatible Shields and addon boards.
22,00 € In StockCrowtail Motor Base Shield 2.0
ECT-CT0069MBS
Elecrow CT0069MBS - L298P moottoriohjainkortti Arduinolle Crowtail 2.0 liittimillä.
22,00 €
13,20 € In Stock
19,98 € In Stock
35,45 € In StockCAN FD Shield for Arduino
SEEED-102991775
Seeed Studio 102991775 - CAN FD Shield for Arduino - CAN-FD, CAN 2.0, industrial standard 9-pin sub-D, high-speed SPI interface, selectable OBD-II and CAN standard pinouts, adjustable chip select and INT pins
35,45 €
13,66 € In StockGrove Mega Shield v1.2
SEEED-103020027
Seeed Studio 103020027 - Grove - Mega Shield v1.2 is a extension board for Arduino Mega and Google ADK
13,66 €
9,10 € In StockGrove Seeeduino XIAO Shield
SEEED-103020312
Seeed Studio 103020312 - Grove Shield for Seeeduino XIAO - with embedded battery management chip
9,10 €
9,40 € In StockGrove Arduino Base Shield V2
SEEED-103030000
Seeed Studio 103030000 - Grove Base Shield V2.0 for Arduino
9,40 €
22,63 € Out of stock
37,09 € In StockRelay Shield v3.0
SEEED-103030009
Seeed Studio 103030009 - Relay Shield v3.0 - The Relay Shield provides four high-quality relay that can control high current loads to Arduino / Seeeduino boards. The onboard NO (Normally Open) / NC (Normally Closed) interface could be a nice solution for controlling devices that could not be directly controlled by Arduino's Digital I/Os.
37,09 €
49,01 € In StockW5500 Ethernet Shield
SEEED-103030021
Seeed Studio 103030021 - W5500 Ethernet Shield - Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE. Compatible with standard Arduino/Seeeduino boards Micro-SD card socket for expanding storage. Two built-in Grove connectors for I2C and UART.
49,01 €
40,83 € Out of stockARDUINO CAN-BUS Shield V2 (MCP2515+MCP2551)
SEEED-103030215
Seeed Studio 103030215 - CAN-BUS Shield V2 adopts MCP2515 and MCP2551
40,83 €
7,30 € In StockGrove Shield for Arduino Nano
SEEED-103100124
Seeed Studio 103100124 - Grove Shield for Arduino Nano
7,30 €
38,78 € Out of stockArduino Energy Shield
SEEED-106030000
Seeed Studio 106030000 - Energy Shield is a LiPo battery based power shield that keeps your project alive
38,78 €
23,46 € In StockARDUINO SHIELD Solar Charger Shield v2.2
SEEED-106990020
Seeed Studio 106990020 - Solar Charger Shield v2.2 - Arduino compatilbe shield for li-ion battery charging with solar cells.
23,46 €
45,38 € In StockNFC Shield V2.0
SEEED-113030001
Seeed Studio 113030001 - The NFC Shield includes an integrated PN532 transceiver module that handles contactless data transmission at 13.56MHz. You can read and write a 13.56MHz tag with this NFC Shield or enable point-to-point communication with two NFC Shields.
45,38 €
20,59 € In StockDragino LoRa Shield 433MHz for Arduino
SEEED-113990194
Seeed Studio 113990194 - Dragino LoRa Shield - support 433M frequency
20,59 €
13,87 € In Stock
6,72 € In Stock
