|
SeeedStudio Grove System
Please check https://wiki.seeedstudio.com/Grove_System/
Grove makes it easier to connect, experiment, and simplify the prototyping process. No jumpers or soldering required. Seeedstudio have developed more than 300 Grove modules, covering a wide range of applications that can fulfill a variety of needs. No...
SeeedStudio Grove System
Please check https://wiki.seeedstudio.com/Grove_System/
Grove makes it easier to connect, experiment, and simplify the prototyping process. No jumpers or soldering required. Seeedstudio have developed more than 300 Grove modules, covering a wide range of applications that can fulfill a variety of needs. Not only are these open hardware, but they have also open source software to offer.
SeeedStudio Grove System
Please check https://wiki.seeedstudio.com/Grove_System/
Grove makes it easier to connect, experiment, and simplify the prototyping process. No jumpers or soldering required. Seeedstudio have developed more than 300 Grove modules, covering a wide range of applications that can fulfill a variety of needs. Not only are these open hardware, but they have also open source software to offer.
Seeedstudio Grove inputs: swithes, potentiometers, buttons.
Please check https://www.seeedstudio.com/Input-c-21.html
Seeedstudio Grove Sensors: Robotic, Proximity, Motion, Environmental, Biomedical
Please check https://www.seeedstudio.com/category/Sensor-for-Grove-c-24.html
Seeedstudio Grove Leds: Single Color Leds, RGB Leds, Led drivers
Please check https://www.seeedstudio.com/leds-c-891.html
Seeedstudio Grove Wireless: WIFI, RFID, RF, NFC, Lora, GPS, FM, Bluetooh & BLE
Please check https://www.seeedstudio.com/wireless-c-899.html
Seeedstudio Grove Displays: OLEDs, LCDs
Please check https://www.seeedstudio.com/displays-c-929.html
Seeedstudio Grove Actuators: Speakers, Relays, Motors
Please check https://www.seeedstudio.com/actuators-c-940.html
Seeedstudio Grove Breakouts: Raspberry Pi, micro:bit, Linkit, Beaglebone, Arduino, XIAO
Please check https://www.seeedstudio.com/breakouts-c-933.html
Seeedstudio Grove Kits: Theme Kits, Starter Kits, IoT Kits
Please check https://www.seeedstudio.com/category/Kits-for-Grove-c-28.html
Seeedstudio Grove Accessories: Interfaces, Connectors, Cases
Please check https://www.seeedstudio.com/accessories-c-945.html
SEEED 101020015
Seeed Studio 101020015- Grove - Temperature Sensor - Grove compatible interface Arduino library ready Resistance Tolerance: ±1% 3.3/5V working voltage
SEEED 101020026
Seeed Studio 101020026 - Grove Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side
SEEED 101020036
Seeed Studio 101020036 - Grove - Slide Potentiometer is a linear variable resistor with a total resistance of 10k.
SEEED 101020037
Seeed Studio 101020037 - Grove - Touch Sensor - Fast response Compact modular design Low power consumption Grove compatible interface
SEEED 101020038
Seeed Studio 101020038 - Grove - Magnetic Switch
SEEED 101020048
Seeed Studio 101020048 - Grove - Rotary Angle Sensor(P)
SEEED 101020049
Seeed Studio 101020049 - The Grove - Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range of 760nm - 1100 nm
SEEED 101020063
Seeed Studio 101020063 - Grove - Sound Sensor/ Noise Detector for Arduino
SEEED 101020076
Seeed Studio 101020076 - Grove - Luminance Sensor using APDS-9002 as lumens Sensor, provide the linear transform lumen intensity for the output voltage levels
SEEED 101020174
Seeed Studio 101020174 - Grove - Infrared Reflective Sensor v1.2 can be used for the detection of proximity and color of objects. The reflective photosensor - RPR-220 used in this module consists of an infrared light emitting diode and a high –sensitivity phototransistor.
SEEED 101020193
Seeed Studio 101020193 - Grove Temp&Humi&Barometer Sensor (BME280)
SEEED 101020472
Seeed Studio 101020472 - The Grove - Variable Color LED is an RGB LED that can be controlled by both digital and PWM signal
SEEED 101020512
Seeed Studio 101020512 - Grove - VOC and eCO2 Gas Sensor SGP30 is an air quality sensor(Arduino compatible). Based on SGP30, this module provides TVOC (Total Volatile Organic Compounds) and CO2eq output with outstanding long-term stability and low power consumption, which make it a perfect choice for indoor air quality detection.
SEEED 101020532
Seeed Studio 101020532 - Grove - Time of Flight Distance Sensor-VL53L0X is a high speed, high accuracy and long-range ToF distance sensor based on VL53L0X
SEEED 101020552
Seeed Studio 101020552 - Grove - Capacitive Touch Slide Sensor (CY8C4014LQI), touch sensor, Capacitance Sensor
SEEED 101020553
Seeed Studio 101020553 - Grove - Round Force Sensor (FSR402), touch sensor, Pressure Sensor
SEEED 101020555
Seeed Studio 101020555 - The Grove - 1-Wire Thermocouple Amplifier (MAX31850K) is a thermocouple-to-digital converter with 14-bit resolution and cold-junction compensation. It can measure the values of temperature from -50°C to 600°C.
SEEED 101020580
Seeed Studio 101020580 - Grove Light&Color&Proximity Sensor (TMG39931)
SEEED 101020583
Seeed Studio 101020583 - Grove - Step Counter(BMA456), acceleration
SEEED 101020585
Seeed Studio 101020585 - Grove - IMU 9DOF (lCM20600+AK09918), gyroscope, accelerometer, electronic compass
SEEED 101020594
Seeed Studio 101020594 - Grove - I2C Thermocouple Amplifier (MCP9600), High Temperature Sensor, Type K thermocouple
SEEED 103020027
Seeed Studio 103020027 - Grove - Mega Shield v1.2 is a extension board for Arduino Mega and Google ADK
SEEED 103020312
Seeed Studio 103020312 - Grove Shield for Seeeduino XIAO - with embedded battery management chip
SEEED 103030000
Seeed Studio 103030000 - Grove Base Shield V2.0 for Arduino
SEEED 103030375
Seeed Studio 103030375 - The Arduino Sensor Kit is a joint electronics starter kit from Seeed and Arduino. It integrates 10 commonly used electronics modules on one PCB.
SEEED 104020006
Seeed Studio 104020006 - Grove LED Bar v2.0 - 10 Leds Arduino Library Easy-to-Use
SEEED 104020048
Seeed Studio 104020048 - Grove – Chainable RGB Led V2.0
SEEED 104020108
Seeed Studio 104020108 - Grove - WS2813 RGB LED Strip Waterproof, 30LED/m, 1m, is a Grove compatible LED strip. It can be lighted by Grove interface. RGB WS2813 is widely used in LED, it can change many colors and is programmable.
SEEED 105020003
Seeed Studio 105020003 - Grove - Vibration Motor consists of one coin type motor which is a permanent magnet coreless DC motor.
SEEED 105020008
Seeed Studio 105020008 - Grove Base Shield for NodeMCU
SEEED 107020049
Seeed Studio 107020049 - Grove - I2C FM Receiver, radio
SEEED 110020109
Seeed Studio 110020109 - Grove Starter kit for Arduino&Genuino 101 - Rapid prototyping Well-chosen Grove modules Easy-to-use base shield
SEEED 110990027
Seeed Studio 110990027 - Grove - Universal 4 Pin Buckled 20cm Cable (5 PCs pack)
SEEED 110990028
Seeed Studio 110990028 - Grove - 4 pin Female Jumper to Grove 4 pin Conversion Cable (5 PCs per PAck) - High quality copper wires Easy to use connectors Converts 2.54 pitch pin headers to Grove connector Designed for plug-n-play Five in one
SEEED 110990031
Seeed Studio 110990031 - Grove - Universal 4 Pin 20cm Unbuckled Cable (5 PCs Pack)
SEEED 110990035
Seeed Studio 110990035 - RFID tag combo (125khz) - 5 pcs - 125Khz, EM4100 standard.
SEEED 110990057
Seeed Studio 110990057 - Grove - Branch Cable for Servo (5PCs pack) - Use this cable to connect two servo to Grove system with only 1 cable
SEEED 110990064
Seeed Studio 110990064 - Grove - Universal 4 Pin Buckled 40cm Cable (5 PCs Pack)
SEEED 110990210
Seeed Studio 110990210 - Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)
SEEED 111020044
Seeed Studio 111020044 - Grove - Red LED Button is stable and reliable with a 100 000 times long life. With the built-in LED, you can apply it to many interesting projects, it is really useful to use the LED to show the status of the button.
SEEED 111020046
Seeed Studio 111020046 - Grove - Blue LED Button is stable and reliable with a 100 000 times long life. With the built-in LED, you can apply it to many interesting projects, it is really useful to use the LED to show the status of the button.
SEEED 113020002
Seeed Studio 113020002 - Grove - 125KHz RFID Reader - 7cm sensing distance 125kHz RFID Card Read Only Arduino Library
SEEED 113020003
Seeed Studio 113020003 - Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 module and serial communication configuration, providing a precise, sensitive, low power GPS module for position recognition anywhere in the world.
SEEED 113020011
Seeed Studio 113020011 - Grove - UART WiFi V2 is a WiFi module for Arduino and Seeeduino, this Arduino WiFi module based on ESP8285 - the upgraded version of ESP8266.
SEEED 114020163
Seeed Studio 114020163 - 4-pin, 2.0mm pitch, Grove Female Header pack with 20pcs