No products
Filter by
Robot electronics There are 45 products.
6,80 € In Stock
11,00 € In Stock
18,60 € In Stock
9,92 € In Stock
12,40 € In Stock
5,80 € Out of stock
9,60 € In Stock
6,80 € In Stock
48,36 € In Stock
17,75 € In Stock
17,40 € In Stock
20,00 € In StockARDUINO 4DUINO MINI PRO
ARD 4DMINIP
Arduino Mini compatible development board with integrated motor controller. Ideal solution for small robot projects.
20,00 €
27,28 € In StockARDUINO 4DUINO UNO PRO
ARD 4DUNOP
Arduino Uno compatible development board with integrated motor controller .
27,28 €
26,80 € In StockJoy-IT ARDUINO CLONE MEGA 2560 R4
ARD MEGA2560R4
Arduino Mega 2560 R3 compatible clone board.
26,80 €
30,38 € In Stock
9,92 € In Stock
19,90 € In Stock
29,90 € In StockArduino Uno R3
ARDUINO UNO
This Arduino Uno R3 is the most popular AVR ATMEGA328 based testing, learning and prototyping board.
29,90 €
20,15 € In Stock
16,70 € In Stock
18,20 € In StockKitronik Line Following add-on for :MOVE mini
BBC MB 5624LF
Now you can add line following to the :MOVE mini with the Kitronik Line Following add-on for :MOVE mini. Build it, code it, watch it go!
18,20 €
24,90 € In Stock
19,50 € In Stock
4,75 € Out of stock
3,13 € In StockULN2003 Stepper Motor Driver
ELC RDR02805D
ULN2003 Stepper Motor Driver Board is use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v). It's easy to use Arduino or other development platform to drive the stepper motor by this diver board.
3,13 €
5,20 € Out of stock
6,20 € In Stock
6,80 € In Stock
5,70 € In Stock
6,20 € In Stock
35,01 € In Stock
38,90 € In Stock
9,46 € In StockSTEP-UP/D VOLTAGE REGULATOR 1A...
POLOLU 2122
Pololu 3.3V Step-Up/Step-Down Voltage Regulator based on S7V8F3.
9,46 €STEP-UP/D DC/DC- CONVERTER 1A 2,7-11,8V/5VDC
POLOLU 2123
Pololu 5V Step-Up/Step-Down Voltage Regulator based on S7V8F5.
10,29 €
7,57 € In StockSTEP-UP DC/DC CONVERTER 1,2A 0,5-5,5V/5VDC
POLOLU 2562
Pololu 5V Step-Up Voltage Regulator U1V11F5
9,92 €
9,92 € In Stock
30,38 € In StockJoy-IT RASPBERRY PI 16CH SERVO MOTOR...
RPI MOTOPI
Expansion board for the control and use of up to 16 PWM-controlled 5V stepping Motors.
30,38 €
17,90 € In Stock
31,00 € In Stock
36,40 € In StockStepper Motor HAT for Raspberry Pi
RPI RPA20089H
The Stepper Motor Expansion Shield is all-around to support several Steppers/Motors/Servos at the same time and supports multi plate lamination, which is fit for players to diy robots, smart cars and mechanical cars and so forth.
36,40 €
5,58 € In Stock
9,20 € In Stock
0,84 € In Stock
