Complete housing for printed-circuit boards. Includes housing half shells, side panels with openings for all relevant connections, adhesive pads for affixing the Raspberry Pi model B2 and B3 computers, screws for housing and PCB attachment; black housing with turquoise blue corner inlays
Complete housing for Raspberry Pi printed-circuit boards. Includes housing half shells, adhesive strips for integrating the display, side panels with openings for all relevant connections, adhesive pads for affixing the Raspberry Pi model B2 and B3 computers, screws for housing and PCB attachment; black housing with turquoise-blue corner inlays
DIN rail housing for Raspberry Pi computers (suitable for Raspberry Pi A+, B+, B2, B3, B4); set consisting of lower part, upper part, cover, and PCB retainer; housing according to DIN 43880
Perfboard with GPIO connection incl. PTSM terminal blocks
Adapter for protecting the corners of the UCS housing; material: TPE-U; color: turquoise blue, similar to RAL 5018; held in the screw holes of the housing
Adapter for mounting the UCS housing on the wall, material: polyamide, color: turquoise similar to RAL 5018, used instead of UCS CC corner insert. Only used in conjunction with UCS GD 9005 adhesive pad
Stand for mounting the UCS housing, height: 47 mm; material: polyamide; color: turquoise blue, similar to RAL 5018; wall mounting option is integrated, snaps into the screw holes of the housing
Joy-IT RB-AlucaseP4+01B - Black aluminium case in a high-quality look for your Raspberry Pi 4 B. Offers adequate protection with its massive structure. Each of the ports, including the GPIO and SD Card Slot are easily accessible.
Joy-IT RB-AlucaseP4+07FAN - This high-quality, aluminium-based case protects your Raspberry Pi 4 B not only against exterior shocks but also against interior excessive heat development. The channel milling, combined with the dual fans offers best cooling performance. That's why it is perfect even for extreme settings and environments.
Joy-IT RB-AlucaseP4+08 - This aluminium case in a precious design is very robust and protects your Raspberry Pi 4 B perfectly against outer influences. There are cut-outs for all interfaces to make them accessible. The channel milling at the top side serves as a heat sink and inside the housing the case is in direct contact with the CPU and the RAM to...
Joy-IT RB-Case+12 - Acryl case for Raspberry Pi
RB-CaseP4+01 - Transparent acrylic case for Raspberry Pi 4 model B. It protects the Raspberry optimal and leaves the connections perfectly accessible. It consists of high-quality transparent acryl and high-quality spacers out of brass and has got venting holes on the topside.
ASM-1900136-21 - This case for your Raspberry Pi 4 Model B impresses with its elegant, simple design. It is easy to assemble and has an open design with a ventilation slot, which allows good air circulation.
Joy-IT RB-CaseP4+03B - Robust plastic case for your Raspberry Pi 4B. Thanks to the strong magnets in the upper, middle and lower part of this case, screw-less mounting is possible and the cover can be removed at any time. It can be assembled in a few steps and the magnetic lock provides easy access to the GPIO pins and your device at any time.
RASPBERRY-PI-4-CASE-BG - This elegant, very robust case from Raspberry Pi, is not only chic, but also high quality and also very easy and quick to mount.
Joy-IT RB-CaseA+01 - This case is a practical "home" for your Raspberry Pi® 3A +.
RPI DINKOT 1
CBRPI-DR-2-3-CLR - Pi B+, P2, P3 DIN Rail Enclosure, IIoT Electronics, Polycarbonate Enclosure
RPI DINKOT 2
Zihatec RasPiBox Open+
RPI DINKOT 7
Joy-IT rb-case+07 - Mounting a Raspberry Pi system inside an equipment rack is easy with this housing by Joy-IT. Upon keeping all ports accessible, it can accommodate add-on boards along with the mainboard, and there's a transparent door for quick access to the components as well.
Elecrow RPA07510C - Raspberry Pi 3B+ Case with Cooling Fan + Heatsinks
RPI ZERO CASE CLEAR
RPI ZERO W CASE