|
Filter by
Loading...
Seeedstudio Grove Wireless: WIFI, RFID, RF, NFC, Lora, GPS, FM, Bluetooh & BLE
Please check Grove Communication https://www.seeedstudio.com/category/Grove-c-1003.html
Seeedstudio Grove Wireless: WIFI, RFID, RF, NFC, Lora, GPS, FM, Bluetooh & BLE
Please check Grove Communication https://www.seeedstudio.com/category/Grove-c-1003.html
ESP-GRVWIFI8266
Cytron GRV-WIFI-8266 - Grove WiFi 8266 - IoT for micro:bit and beyond
SEEED 114992978
Seeed Studio 114992978 - Grove - CAN BUS Module based on GD32E103
SEEED-101020026
Seeed Studio 101020026 - Grove Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side
SEEED-109020022
Seeed Studio 109020022 - Grove-GPS (Air530) is a high-performance, highly integrated multi-mode satellite positioning and navigation module, supporting plenty of location systems, such as GPS/Beidou/Galileo and etc.
SEEED-113020002
Seeed Studio 113020002 - Grove - 125KHz RFID Reader - 7cm sensing distance 125kHz RFID Card Read Only Arduino Library
SEEED-113020003
Seeed Studio 113020003 - Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 module and serial communication configuration, providing a precise, sensitive, low power GPS module for position recognition anywhere in the world.
SEEED-113020006
Seeed Studio 113020006 - Grove NFC - Built around PN532 module Contactless communication at 13.56MHz. Support ISO14443 Type A and Type B protocols Support I2C or UART communication protocols Grove connector compatible
SEEED-113020008
Seeed Studio 113020008 - Grove - Serial Blueseeed TH (CSR BC417) is an easy to use module compatible with the existing Grove Base Shield, and designed for transparent wireless serial connection setup.
SEEED-113020011
Seeed Studio 113020011 - Grove - UART WiFi V2 is a WiFi module for Arduino and Seeeduino, this Arduino WiFi module based on ESP8285 - the upgraded version of ESP8266.
SEEED-113020091
Seeed Studio 113020091 - Grove - LoRa-E5 (STM32WLE5JC), EU868/US915, LoRaWAN supported
SEEED-113060007
Seeed Studio 113060007 - Using RFM95 module based on SX1276 LoRa® Inputting voltage:5V/3.3V ~28mA(Avg) @+20dBm continuous transmit ~8.4mA(Avg)@standby mode ~20mA(Avg) @receive mode, BW-500kHz