Grove

Manufacturers

Grove GPS (Air530)

SEEED 109020022

Currently unavailable

Manufacturer homepage

21,44 €

Seeed Studio 109020022 - Grove-GPS (Air530) is a high-performance, highly integrated multi-mode satellite positioning and navigation module, supporting plenty of location systems, such as GPS/Beidou/Galileo and etc.

Description

Confused about your GPS not working well in urban or outsides under only one or a few satellite module? Then you should not miss our new Grove-GPS (Air530). It’s a high-performance, highly integrated multi-mode satellite positioning and navigation module to use with Arduino. It supports GPS / Beidou / Glonass / Galileo / QZSS / SBAS, which makes it suitable for GNSS positioning applications such as car navigation, smart wear, and drone. Meanwhile, this module is capable of receiving more than 6 satellites at the same time and is able to work excellently even if there's a very bad signal.

Features

  • Positioning error within 10 meters
  • Multi-mode satellite positioning & navigation and support more than 6 satellites at the same time
  • The position still quickly and accurately under the condition of bad signal 
  • Low power consumption at only 31uA
  • Compatible hard/soft interface for other modules
  • Adopt the integrated design of RF baseband, which integrates DC/DC, LDO, LNA, RF front-end, baseband processing, 32-bit RISC based chip, RAM, FLASH storage, RTC and power management functions

Specification

parametersvalues
Supply voltage3.3V/5V
Working currentup to 60mA
InterfaceUART
Time of warm start4s
Time of cold boot30s
Working Temperature-35C-85°C
Storage Temperature-55°C-100°C
Humidity5%-95%

Time of Positioning
Pure hardware cold start27.5s
Pure hardware hot start<1S
Pure hardware recapture<1S
Software-assisted A-GNSS<5S

Sensitivity
Cold start-148dBm
Hot Start-162dBm
Recapture-164dBm
Track-166dBm

Accuracy
Horizontal positioning accuracy2.5m
High positioning accuracy3.5m
Speed accuracy0.1m/s
Time transfer accuracy30ns

Consumption
Capture current value@3.3V42.6mA
Tracking current value@3.3V36.7mA
Low power mode@3.3V0.85mA
Ultra-low-power mode@3.3V31uA

Applications

  • GPS tracker
  • GPS navigation
  • Distance measurement
  • Car navigation
  • Drone

Part list

ItemsValues
GPS (Air 530) board1
Grove cable1


Cautions

  • The input power supply voltage of Grove power supply interface, should not exceed 5.6V, otherwise it may damage the device.
  • The voltage of the selected button battery should not exceed 3V, or it will probably damage the device.

Links

click for more info
ManufacturerSeeed Studio
Manufacturer's model109020022

Customers who bought this product also bought:

 
Tuo ostoskori Excel-tiedostosta (.xls) jossa on tuotekoodit ja määrät