|
Owon ODP3031 - power supply with...
KOT G080
Kemo G080 - Standard Flat Case approx. 120 x 70 x 20 mm
ECT CRT00313P
Elecrow CRT00313P - Crowtail- FSR402 Pressure Sensor
KEMO M033N
KEMO M033N - Universal 18W amplifier module with robust, shock-proof case.
SEEED 316010005
Seeed Studio 316010005 - analog servo motor with 4-pin Grove connector.
SEEED 114992364
Seeed Studio 114992364 - This Antenna Kit is certified for use with the Raspberry Pi Compute Module 4.
RPI CM4-3223
Heatsink for Raspberry Pi CM4. Thermal pads for CPU, PMU and Wireless modules.
PIM554
Pimoroni PIM554 - A conveniently sized, labelled proto-board add-on for your Raspberry Pi Pico, perfect for permanently attaching your custom circuits!
SEEED 102010026
Seeed Studio 102010026 - Seeeduino V4.2 is an Arduino-compatible board, which is based on ATmega328P MCU, Arduino UNO bootloader, and with an ATMEGA16U2 as a UART-to-USB converter. The three on-board Grove interface can make your board connect to over 300 Grove modules.
SEEED 104030008
Seeed Studio 104030008 - Grove - OLED Display 0.96" - 128×64 dot resolution display I2C Grove interface
SEEED 110990037
Seeed Studio 110990037 - Grove Female Header - DIP-4P-2.0mm-90D-10 Pcs
ECT CT0051URS
Elecrow CT0051URS - Crowtail- Ultrasonic Ranging Sensor
USB ESP01
USB to ESP01(ESP8266) Serial Adapter Board
RUT956
Teltonika RUT956 - a compact industrial 4G (LTE) router equipped with 4x Ethernet ports, WiFi, Dual-SIM, GPS, an I/O connector block, RS232/RS485 and RutOS software for advanced networking solutions.
SEEED 101020089
Seeed Studio 101020089 - Grove - Sunlight sensor (UV-light, visible light and infrared light) - SI1151
PIM471
Pimoroni PIM471 - Arcade Parts Kit - includes joystick, 10 push-button switches, wire harness.
COLBC
Vention COLBC - USB 2.0 A/microB cable with PVC jacket, supports 3A fast charging, colour black, length 0,25m.
CFABB
Vention CFABB - Allows wired (RJ-45) connection to the Ethernet network from the USB-C port on your laptop. 10/100 Mbps speed.
SEEED 102991596
Seeed Studio 102991596 - Longan Labs CANBed RP2040 is a CAN Bus development board powered by an Raspberry Pi RP2040 chip with a high-performance MCP2515 CAN controller and MCP2551 CAN receiver operating at CAN2.0 protocols in 133MHz.
RPI CAMHDMIEXT
This Arducam CSI to HDMI Cable Extension Module is designed to extend the Raspberry Pi camera cable with a standard HDMI cable.
RPI MAKERPIPICONB
Cytron MAKER-PI-PICO-NB - Raspberry Pi Pico development platform with versatile interfaces e.g. Grove, memory card, audio etc.
CODHD
Vention CODHD - USB 2.0 A/C cable with nylon braided TPE jacket, supports 3A fast charging, colour black, length 0,5m.
PKW-STP-SLIM-KAT6 1.5 GN
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 1,5m green
PKW-LIGHT-STP-K6A 2.0
SLIM® CAT6A Patchcords ROUND design - U/FTP shielded - 2,0m grey
WKK 221281015
WKK 221281015 - H-5(3X)-F 3:1 125C 9.0/3.0mm - black heat shrink tube with adhessive in a box, length 3m
LCD RBTFT18
Joy-IT RBTFT18 - SPI bus controlled touch screen small TFT display. Size 1.8 inches, resolution 128x160 pixels, 262k colors. Suitable for Arduino and Raspberry projects.
WKK 273015102
WKK 273015102 HLB 320 - Heat shrinkable cable breakout 1-to-2
VGATE-ICAR2
Works with most OBD2-compatible car models. European 2001 petrol engines and 2003 diesel engines after.