|
PKW-SLIM-KAT6-1.5-SW
SLIM® CAT6 Patchcords FLAT design - U/UTP unshielded - 1,5m black
PKW-SLIM-KAT6-2.0-WS
SLIM® CAT6 Patchcords FLAT design - U/UTP unshielded - 2,0m white
PKW-STP-SLIM-KAT6-0.15-GE
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,15m yellow
PKW-STP-SLIM-KAT6-5.0
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 5,0m grey
PKW-STP-SLIM-K6A-0.5-WS
SLIM® CAT6A Patchcords FLAT design - U/FTP shielded - 0,5m white
PKW-STP-SLIM-K6A-1.5-WS
SLIM® CAT6A Patchcords FLAT design - U/FTP shielded - 1,5m white
PKW-STP-SLIM-K6A-2.0-BL
SLIM® CAT6A Patchcords FLAT design - U/FTP shielded - 2,0m blue
PKW-STP-SLIM-K6A-3.0-WS
SLIM® CAT6A Patchcords FLAT design - U/FTP shielded - 3,0m white
DC-PLUG-P1J-P1JR
Allows the use of a wide range of universal power supplies in devices with a deep recessed connection
PKW-LIGHT-STP-K6A-0.25-WS
SLIM® CAT6A Patchcords ROUND design - U/FTP shielded - 0,25m white
PKW-TOUGH-K6-5.0-BL
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/UTP unshielded - 5,0m blue
PKW-TOUGH-K6-5.0-RT
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/UTP unshielded - 5,0m red
PKW-LIGHT-STP-K6-0.15-WS
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 0,15m white
PKW-LIGHT-STP-K6-1.0-BL
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 1,0m blue
PKW-LIGHT-STP-K6-1.5-WS
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 1,5m white
PKW-LIGHT-STP-K6-3.0-SW
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 3,0m black
PKW-LIGHT-STP-K6-5.0
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 5,0m grey
PKW-LIGHT-STP-K6-5.0-SW
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 5,0m black
SPF-KIT-15209
SparkFun KIT-15209 - The SparkFun RFID Qwiic Kit is a simple, yet all-in-one I2C based RFID starting point for the ID-3LA, ID-12LA, and ID-20LA readers.
RPI-W5100-WIZNET
WIZnet W5100S-EVB-Pico - The W5100S-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5100S - and basically works the same as the Raspberry Pi Pico board but with additional Ethernet via W5100S.
30621557
Bostik Born2Bond™ Retaining anaerobic adhesives are economical and adaptable solutions for use in place of or in addition to mechanical holding processes.
PINECIL-SHBLK
Pine64 PINECIL-SHBLK - PINECIL Replacement Shell – Black Color
ESP32-MFAIOTS3
Cytron V-MAKER-FEATHER-AIOT-S3 - Maker Feather AIoT S3 is a development platform that allows users to combine wireless connectivity to IoT devices with the ability to use artificial intelligence (AI) in devices.
SMA-SMFOTK03
Short SMA extension cable, for example to lead the antenna outside the installation enclosure
SMA-18-0.5
Short SMA extension cable, for example to lead the antenna outside the installation enclosure
RPI-HATMAKER
Cytron HAT-MAKER - Maker pHAT is a Cytron product designed to facilitate the use of Raspberry Pi in education and hobby projects.
SHELLY-WS4W
Shelly Wall Switch 4 - a four-button wall switch that allows you to control Shelly relay switches.
ARD-ABX00049
Original Arduino® ABX00049 - Arduino Portenta X8 is a powerful and versatile development platform designed specifically for advanced IoT applications. It is equipped with a powerful Arm Cortex-M7 processor for fast and accurate performance.
WKK-21111140015
WKK 21111140015 - H-2(Z) 2:1 125C 19.0/9.5mm - black heat shrink tube in a box, length 5m