|
VASTUSLAJITELMAV2
A comprehensive range of 0.6W metal foil resistors in the E12 value range from 1.0 ohms to 4.7 megaohms. A total of 890 pieces in value labelled bags.
GDP-025
GW Instek GDP-025 - Active differential probe for oscilloscopes. Enables measurement of differential signals with a standard oscilloscope.
SHELLY PLUS PMM3
Shelly PM Mini Gen3 - WiFi power meter.
SHELLY PLUS1PMM3
WiFi-operated relay switch, 1 channel 8A, with Power Metering
SHELLY PLUS 1M 3
Shelly 1 Mini Gen 3 - relay switch for Wi-Fi. The relay switch can be used to control a wide range of products at any time and from anywhere. Shelly's relay switch turns your product into a smart one.
SHELLY PRO DIM1P
Shelly Pro Dimmer 1PM - is a single-channel Wi-Fi smart dimmer with single-phase energy consumption measurement, supporting a maximum load of 10 A and mounts directly on a DIN rail.
SHELLY PRO DIM2P
Shelly Pro Dimmer 2PM - is a dual-channel Wi-Fi smart dimmer with single-phase energy consumption measurement, supporting a maximum load of 10 A and mounts directly on a DIN rail.
PEAK 3435 TR
Additional transmitter for PeakTech® 3435 cable detector.
PEAK 2275
PeakTech 2275® - Electronic DC load 150W. Suitable for testing power supplies, batteries, solar panels, etc.
PEAK 5225
PeakTech® 5225 - Ultrasonic material / coating thickness meter. The meter is used to measure, for example, the thickness of a layer of paint. Widely applicable to a wide range of materials such as metals, glass, and ceramics.
PEAK 2755
PeakTech® 2755 - Installation tester for testing electrical installations with Bluetooth connection and PC software.
RASPBERRY PI5-8GB-SET
Raspberry Pi 5 8GB - a package with just the screen you need
PEAK 3435
PeakTech® 3435 - Cable detector for finding cables and metallic pipes. Consists of a receiver and a transmitter unit. The transmitter unit sends a signal to the cable to be searched, which is detected by the receiver. The receiver supports up to 7 transmitters simultaneously (one transmitter is supplied, the rest must be purchased separately).
PEAK 2715
PeakTech® 2715 - Digital loop/short circuit current tester. Allows measurement of loop impedance and prospective short circuit current in electrical installations.
PEAK 2710
PeakTech® 2710 - Digital RCD tester. Suitable for testing the operation of a residual current device in electrical installations. Measures tripping time and current. Test current adjustable from 10-1000mA.
PEAK 2235
PeakTech® 2235 - Adjustable isolation transformer and 0-30 V DC power supply. Includes variable 0-250V/1000W isolation transformer and DC power supply 0-30V/5A with fixed 5V output.
L1W1MLT500S20E
Fulham L1W1MLT500S20E - 20W led driver with adjustable current 110-500mA
PEAK 1565
PeakTech® P 1565 - USB-programmable SMPS single output DC laboratory power supply 1-16V / 0-40A.
PIM700
Pimoroni PIM700 - Extension board for connecting NVMe SSDs to Raspberry Pi 5. Includes a 500GB SSD Drive.
PIM699
Pimoroni PIM699 - Extension board for connecting NVMe SSDs to Raspberry Pi 5
PEAK 1530
PeakTech® P 1530 - Single output SMPS DC laboratory power supply 1-16V / 0-60A.
PEAK 1560
PeakTech® P 1560 - Single output SMPS DC laboratory power supply 1-32V / 0-30A.
PEAK 1525
PeakTech® P 1525 - Single output SMPS DC laboratory power supply 1-16V / 0-40A.
PEAK 1585
PeakTech® P 1585 - USB-programmable SMPS single output DC laboratory power supply 1-60V / 0-15A. Supports setting, timing and monitoring via PC software. Thanks to switched mode topology, the power supply is lightweight and compact.
PEAK 1580
PeakTech® P 1580 - USB-programmable SMPS single output DC laboratory power supply 1-32V / 0-30A.
PEAK 1575
PeakTech® P 1575 - USB-controllable SMPS single output DC laboratory power supply 1-32V / 0-20A.
PEAK 1570
PeakTech® P 1570 - USB-programmable SMPS single output DC laboratory power supply 1-16V / 0-60A.
TAP100
Teltonika TAP100 - Wireless WiFi Base Station with 18W PoE Injector - IEEE 802.11b/g/n WIFI 4 RJ45 10/100 Mbps
SHELLY SP3D0020
Enclosure for Shelly 1L / Dimmer2 / RGBW2 relay switches. Includes 2pcs WAGO 221-413 connectors
PT100-M222
Heraeus M222 100ohm -50°C ... +300°C Class A F 0.15
PT1000-M222
Heraeus M222 1000ohm -50°C ... +300°C Class A F 0.15
SDCIT2/64GB
Kingston SDCIT2/64GB - memory card with extended temperature range
SDCIT2/32GB
Kingston SDCIT2/32GB - memory card with extended temperature range