XYTRONIC LF-8800
200W DIGITAL DISPLAY CORRECTION STATION FOR LEAD-FREE/LEADED USE
- Digital display
- Accurately displays both set and actual temperature.
- Display unit
- Displays degrees Celsius or Fahrenheit.
- Energy saving
- If the soldering iron is not used for 15 minutes, the soldering iron halves the temperature of the blade and the Pause LED lights up. This increases the life of the blade. Lead-free soldering requires a higher temperature and this reduces the life of the blade considerably.
- Blade cleaner
- Made of soft brass (RoHS). No water is needed for cleaning and the cleaning result is better than a conventional sponge.
- Low voltage
- The soldering iron is supplied with 32V AC voltage via a flexible and heat-resistant cable.
- ESD safe
- The temperature control uses zero point technology to reduce the occurrence of voltage spikes and is safe for sensitive CMOS circuits.
- RoHS compliant
- Meets the requirements of the RoHS Directive.
- Delayed suction
- Suction continues for a few seconds after the suction button is released.
POWER OF THE DRIVER | 32VAC / 100W |
SOLDERING IRON TEMPERATURE RANGE | 150-480°C |
SUCTION POWER | 32VAC / 100W |
TIN ASPIRATOR TEMPERATURE RANGE | 300-450°C |
TEMPERATURE CONTROL | ±3°C |
Depending on the time of manufacture, there are at least two different models of soldering handles - the tips of these are not interchangeable.
On the suction side, the suction tips of the older 988 series (suction handle model DIA100).