|
SEEED-110110110
Seeed Studio 110110110 - Mini Router/PC with Raspberry Pi Compute Module 4, Dual Gigabit Ethernet NICs, 4GB RAM/32GB eMMC, Support OpenWRT
SEEED-110110205
Seeed Studio 110110205 - RPi CM4 based mini Router with custom OpenWRT firmware, equipped with 4GB RAM, 32GB storage, dual Gigabit Ethernet ports and dual USB 3.0 ports.
SEEED-110990027
Seeed Studio 110990027 - Grove - Universal 4 Pin Buckled 20cm Cable (5 PCs pack)
SEEED-110990028
Seeed Studio 110990028 - Grove - 4 pin Female Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)
SEEED-110990030
Seeed Studio 110990030 - Grove Female Header - DIP-4P-2.0mm-10 Pcs
SEEED-110990031
Seeed Studio 110990031 - Grove - Universal 4 Pin 20cm Unbuckled Cable (5 PCs Pack)
SEEED-110990035
Seeed Studio 110990035 - RFID tag combo (125khz) - 5 pcs - 125Khz, EM4100 standard.
SEEED-110990036
Seeed Studio 110990036 - Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs pack)
SEEED-110990037
Seeed Studio 110990037 - Grove Female Header - DIP-4P-2.0mm-90D-10 Pcs
SEEED-110990038
Seeed Studio 110990038 - Grove - Universal 4 Pin Buckled 50cm Cable (5 PCs Pack)
SEEED-110990040
Seeed Studio - Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)
SEEED-110990041
Seeed Studio 110990041 - Bus Pirate v3 probe Kit, commonly used 2.54mm spaced pin 10 pin 2*5
SEEED-110990057
Seeed Studio 110990057 - Grove - Branch Cable for Servo (5PCs pack) - Use this cable to connect two servo to Grove system with only 1 cable
SEEED-110990064
Seeed Studio 110990064 - Grove - Universal 4 Pin Buckled 40cm Cable (5 PCs Pack)
SEEED-110990080
Seeed Studio 110990080 - 4 pin dual-female jumper wire - 300mm (5 PCs pack)
SEEED-110990210
Seeed Studio 110990210 - Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)
SEEED-110991524
Seeed Studio 110991524 - Wio Lite AI: Powerful AI vision development tool kit based on the STM32H725AE chip with RGB LCD and Camera
SEEED-110991748
Seeed Studio 110991748 - SenseCAP K1100 - The Sensor Prototype Kit with LoRa® and AI - The Sensor Prototype Kit with LoRa® and AI enables you to rapidly digitize the world using LoRaWAN® and solve real-world challenges. With this plug-and-play toolkit, anyone can add AI to their edge devices and unlock the potential of AIoT.
SEEED-111020043
Seeed Studio 111020043 - Grove 6-Position DIP Switch
SEEED-111020045
Seeed Studio 111020045 - Grove - Yellow LED Button is stable and reliable with a 100 000 times long life. With the built-in LED, you can apply it to many interesting projects, it is really useful to use the LED to show the status of the button.
SEEED-111020046
Seeed Studio 111020046 - Grove - Blue LED Button is stable and reliable with a 100 000 times long life. With the built-in LED, you can apply it to many interesting projects, it is really useful to use the LED to show the status of the button.
SEEED-111020103
Seeed Studio 111020103 - Grove - Dual Button includes 2 buttons, enables you to control two signal channels with one grove module. With 4 different color keycaps provided, you can freely adjust the color combination as needed.
SEEED-112990066
Seeed Studio 112990066 - 32GB Class10 micro-SD card and a micro-SD card to USB reader.
SEEED-113020002
Seeed Studio 113020002 - Grove - 125KHz RFID Reader - 7cm sensing distance 125kHz RFID Card Read Only Arduino Library
SEEED-113020003
Seeed Studio 113020003 - Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 module and serial communication configuration, providing a precise, sensitive, low power GPS module for position recognition anywhere in the world.
SEEED-113020006
Seeed Studio 113020006 - Grove NFC - Built around PN532 module Contactless communication at 13.56MHz. Support ISO14443 Type A and Type B protocols Support I2C or UART communication protocols Grove connector compatible
SEEED-113020008
Seeed Studio 113020008 - Grove - Serial Blueseeed TH (CSR BC417) is an easy to use module compatible with the existing Grove Base Shield, and designed for transparent wireless serial connection setup.
SEEED-113020011
Seeed Studio 113020011 - Grove - UART WiFi V2 is a WiFi module for Arduino and Seeeduino, this Arduino WiFi module based on ESP8285 - the upgraded version of ESP8266.
SEEED-113020091
Seeed Studio 113020091 - Grove - LoRa-E5 (STM32WLE5JC), EU868/US915, LoRaWAN supported
SEEED-113030001
Seeed Studio 113030001 - The NFC Shield includes an integrated PN532 transceiver module that handles contactless data transmission at 13.56MHz. You can read and write a 13.56MHz tag with this NFC Shield or enable point-to-point communication with two NFC Shields.
SEEED-113060007
Seeed Studio 113060007 - Using RFM95 module based on SX1276 LoRa® Inputting voltage:5V/3.3V ~28mA(Avg) @+20dBm continuous transmit ~8.4mA(Avg)@standby mode ~20mA(Avg) @receive mode, BW-500kHz
SEEED-113100022
Seeed studio 113100022 - WM1302 Raspberry Pi Hat is an add-on expansion board designed specifically for attaching the WM1302 LoRaWAN Gateway module based on SX1302 to Raspberry Pi versions up to Raspberry Pi 4B.
SEEED-113990830
Seeed Studio 113990830 - Dragino LoRaST IoT Module Featuring LoRa® technology - Support 868MHz Frequency
SEEED-113990934
Seeed Studio 113990934 - LoRa-E5 Development Kit - based on LoRa-E5 STM32WLE5JC, LoRaWAN protocol and worldwide frequency supported
SEEED-113990939
Seeed Studio 113990939 - LoRa-E5 mini (STM32WLE5JC) Dev Board, LoRaWAN protocol and worldwide frequency supported
SEEED-113991034
Seeed Studio 113991034 - JNCRADIO VNA 4.3 Inch 3GHz Vector Network Analyzer- 50kHz-3GHz Short Wave HF VHF UHF, sweep speed 400pts/s, Aluminum alloy case, and IPS LCD Screen
SEEED-113991054
Seeed Studio 113991054 - Seeed Studio XIAO ESP32C3 - tiny MCU board with Wi-Fi and Bluetooth5.0, battery charge supported, power efficiency and rich Interface
SEEED-113991114
Seeed Studio XIAO ESP32S3 - 2.4GHz WiFi, BLE 5.0, 8MB PSRAM, 8MB FLASH, Dual-core, battery charge supported, power efficiency and rich Interface, ideal for Smart Homes, IoT, Wearable Devices, Robotics
SEEED-113991115
Seeed Studio 113991114 - Seeed Studio XIAO ESP32S3 - 2.4GHz WiFi, BLE 5.0, 8MB PSRAM, 8MB FLASH, Dual-core, battery charge supported, power efficiency and rich Interface, ideal for Smart Homes, IoT, Wearable Devices, Robotics
SEEED-114020001
Seeed Studio 114020001 - GrovePi Zero is a breakout board for Raspberry Pi Zero with 40-pin GPIO connector and 6 Grove ports.
SEEED-114020121
Seeed Studio 114020121 - 3-Axis Digital Accelerometer ±2g, ±4g, ±8g, ±16g
SEEED-114020164
Seeed Studio 114020164 - 4-pin, 2.0mm pitch, 90deg, Grove Female Header pack with 20pcs
SEEED-114100001
Seeed Studio 114100001 - Raspberry Pi RTC Expansion Module v1.1
SEEED-114990055
Seeed Studio 114990055 - This is conductive stainless steel sewing thread. It's very thin, strong, smooth that is suited to build wearable products.
SEEED-114991193
Seeed Studio 114991193 - OBD-II CAN-BUS Development Kit. You can monitor your car's functioning based on the data stored in its own vehicle computer.
SEEED-114991377
Seeed Studio 114991377 - Serial CAN-BUS Module based on MCP2551 and MCP2515 - enable your Arduino and other MCU to communicate to CAN-BUS to hack your vehicle.
SEEED-114991438
Seeed Studio 114991438 - OBD-II CAN-BUS Development Kit