|
SEEED 110061441
Seeed Studio 110061441 - reComputer J1020 v2 is a hand-size edge AI box built with Jetson Nano module, rich set of IOs, aluminum case, passive heatsink, and pre-installed JetPack System, ready for your next AI application development and deployment.
SEEED 110070025
Seeed Studio 110070025 - Grove - Wrapper is a kind of wrapper to fix and protect Grove modules
SEEED 110070048
Seeed Studio 110070048 - reTerminal CM4104032- Embedded Linux with Raspberry Pi CM4 and 5-Inch Capacitive Multi-Touch Screen
SEEED 110090326
Seeed Studio 110090326 - Robot car Kit- RC Smart Car Chassis Kit
SEEED 110110044
Seeed Studio 110110044 - Sipeed Maixduino Kit for RISC-V AI + IoT, Arduino Uno form factor devboard with camera and 2.4" TFT display
SEEED 110110110
Seeed Studio 110110110 - Mini Router/PC with Raspberry Pi Compute Module 4, Dual Gigabit Ethernet NICs, 4GB RAM/32GB eMMC, Support OpenWRT
SEEED 110110205
Seeed Studio 110110205 - RPi CM4 based mini Router with custom OpenWRT firmware, equipped with 4GB RAM, 32GB storage, dual Gigabit Ethernet ports and dual USB 3.0 ports.
SEEED 110990027
Seeed Studio 110990027 - Grove - Universal 4 Pin Buckled 20cm Cable (5 PCs pack)
SEEED 110990028
Seeed Studio 110990028 - Grove - 4 pin Female Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)
SEEED 110990030
Seeed Studio 110990030 - Grove Female Header - DIP-4P-2.0mm-10 Pcs
SEEED 110990031
Seeed Studio 110990031 - Grove - Universal 4 Pin 20cm Unbuckled Cable (5 PCs Pack)
SEEED 110990035
Seeed Studio 110990035 - RFID tag combo (125khz) - 5 pcs - 125Khz, EM4100 standard.
SEEED 110990036
Seeed Studio 110990036 - Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs pack)
SEEED 110990037
Seeed Studio 110990037 - Grove Female Header - DIP-4P-2.0mm-90D-10 Pcs
SEEED 110990038
Seeed Studio 110990038 - Grove - Universal 4 Pin Buckled 50cm Cable (5 PCs Pack)
SEEED 110990040
Seeed Studio - Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)
SEEED 110990041
Seeed Studio 110990041 - Bus Pirate v3 probe Kit, commonly used 2.54mm spaced pin 10 pin 2*5
SEEED 110990049
Seeed Studio 110990049 - Breadboard 1 pin dual-male jumper wire 75pcs pack
SEEED 110990057
Seeed Studio 110990057 - Grove - Branch Cable for Servo (5PCs pack) - Use this cable to connect two servo to Grove system with only 1 cable
SEEED 110990064
Seeed Studio 110990064 - Grove - Universal 4 Pin Buckled 40cm Cable (5 PCs Pack)
SEEED 110990080
Seeed Studio 110990080 - 4 pin dual-female jumper wire - 300mm (5 PCs pack)
SEEED 110990210
Seeed Studio 110990210 - Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)
SEEED 110991188
Seeed Studio 110991188 - Sipeed M1w dock suit ( M1w dock + 2.4 inch LCD + OV2640 ) K210 Dev. Board 1st RV64 AI board for Edge Computing
SEEED 110991190
Seeed Studio 110991190 - Sipeed MAIX Bit Suit With LCD, Camera
SEEED 110991444
Seeed Studio 110991444 - DT71 Mini Digital Tweezers - LCR/ ESR Meter, Multimeter, SMD Tester with Built-in Micro Signal Generator
SEEED 110991524
Seeed Studio 110991524 - Wio Lite AI: Powerful AI vision development tool kit based on the STM32H725AE chip with RGB LCD and Camera
SEEED 110991748
Seeed Studio 110991748 - SenseCAP K1100 - The Sensor Prototype Kit with LoRa® and AI - The Sensor Prototype Kit with LoRa® and AI enables you to rapidly digitize the world using LoRaWAN® and solve real-world challenges. With this plug-and-play toolkit, anyone can add AI to their edge devices and unlock the potential of AIoT.
SEEED 111020000
Seeed Studio 111020000 - Grove - Button (Panel Mount)
SEEED 111020043
Seeed Studio 111020043 - Grove 6-Position DIP Switch
SEEED 111020044
Seeed Studio 111020044 - Grove - Red LED Button is stable and reliable with a 100 000 times long life. With the built-in LED, you can apply it to many interesting projects, it is really useful to use the LED to show the status of the button.
SEEED 111020045
Seeed Studio 111020045 - Grove - Yellow LED Button is stable and reliable with a 100 000 times long life. With the built-in LED, you can apply it to many interesting projects, it is really useful to use the LED to show the status of the button.
SEEED 111020046
Seeed Studio 111020046 - Grove - Blue LED Button is stable and reliable with a 100 000 times long life. With the built-in LED, you can apply it to many interesting projects, it is really useful to use the LED to show the status of the button.
SEEED 111020049
Seeed Studio 111020049 - Grove - Mech Keycap
SEEED 111020103
Seeed Studio 111020103 - Grove - Dual Button includes 2 buttons, enables you to control two signal channels with one grove module. With 4 different color keycaps provided, you can freely adjust the color combination as needed.
SEEED 112990066
Seeed Studio 112990066 - 32GB Class10 micro-SD card and a micro-SD card to USB reader.
SEEED 113020002
Seeed Studio 113020002 - Grove - 125KHz RFID Reader - 7cm sensing distance 125kHz RFID Card Read Only Arduino Library
SEEED 113020003
Seeed Studio 113020003 - Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 module and serial communication configuration, providing a precise, sensitive, low power GPS module for position recognition anywhere in the world.
SEEED 113020006
Seeed Studio 113020006 - Grove NFC - Built around PN532 module Contactless communication at 13.56MHz. Support ISO14443 Type A and Type B protocols Support I2C or UART communication protocols Grove connector compatible
SEEED 113020008
Seeed Studio 113020008 - Grove - Serial Blueseeed TH (CSR BC417) is an easy to use module compatible with the existing Grove Base Shield, and designed for transparent wireless serial connection setup.
SEEED 113020011
Seeed Studio 113020011 - Grove - UART WiFi V2 is a WiFi module for Arduino and Seeeduino, this Arduino WiFi module based on ESP8285 - the upgraded version of ESP8266.
SEEED 113020091
Seeed Studio 113020091 - Grove - LoRa-E5 (STM32WLE5JC), EU868/US915, LoRaWAN supported
SEEED 113020111
Seeed Studio 113020111 - Longan I2C CAN-BUS Module based on MCP2551 and MCP2515
SEEED 113030001
Seeed Studio 113030001 - The NFC Shield includes an integrated PN532 transceiver module that handles contactless data transmission at 13.56MHz. You can read and write a 13.56MHz tag with this NFC Shield or enable point-to-point communication with two NFC Shields.
SEEED 113060006
Seeed Studio 113060006 - Grove - LoRa Radio 868MHz (RFM95)
SEEED 113060007
Seeed Studio 113060007 - Using RFM95 module based on SX1276 LoRa® Inputting voltage:5V/3.3V ~28mA(Avg) @+20dBm continuous transmit ~8.4mA(Avg)@standby mode ~20mA(Avg) @receive mode, BW-500kHz
SEEED 113100022
Seeed studio 113100022 - WM1302 Raspberry Pi Hat is an add-on expansion board designed specifically for attaching the WM1302 LoRaWAN Gateway module based on SX1302 to Raspberry Pi versions up to Raspberry Pi 4B.
SEEED 113990051
Seeed Studio 113990051 - NFC Antenna (IPEX)
SEEED 113990254
Seeed Studio 113990254 - Dragino LoRa/GPS HAT for Raspberry Pi - support 868M frequency