|
PKW-LIGHT-STP-K6-1.0-RT
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 1,0m red
RPI-KITMN2040GS
Cytron KIT-MN2040-GS - The Maker Nano RP2040 Getting Started Kit is a good choice for beginners and students who want to learn programming and electronics. It provides everything you need to get started and begin development in a small and easy-to-use package.
SHELLY-FLOOD
Shelly Flood - Designed for water leakage or temperature detection.
SHELLY-HTB-USB
Shelly H&T USB Power Supply -usb power supply, black
SHELLY-PRO-4PM
Shelly Pro 4PM - 1-phase Wi-Fi relay with energy consumption measurement, supporting a maximum load of 40 A (16 A/channel).
ARD-A000052
Original Arduino® A000052 - The Arduino Leonardo uses Atmel's ATmega32u4 microcontroller. This model does not include presoldered pin headers.
WKK-21111142915
WKK 21111142915 - H-1 2:1 105C 1.2/0.6mm - transparent heat shrink tube in a box, length 10m
QWAX50S
QuWireless AX50S - Integrated multi-band LTE & 5G omni antenna + Wi-Fi omni antenna + GPS + place to install Teltonika RUTX50 (All-in-one)
PEAK-1096
PeakTech® P 1096 - is a new development for fast and uncomplicated voltage measurements as a two-pole voltage tester with digital LCD display and additional LED display of the current voltage values. This model has been tested by TÜV / GS for special user safety and has an easy-to-read LCD display with backlight for a precise indication of the voltage...
SHELLY-PRO-3EM
Shelly Pro3 EM - is a three-phase energy meter that uses transformer clamps to measure energy in three individual phases with up to 120 A load and 99% accuracy.
TDEHB
Vention TDEHB - Vention USB-C - HDMI adapter 0.15m, 4K@30Hz
EYE-SENSOR
Teltonika BTSMP1 - Perfect for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory). Including 4 sensors set.
PEAK-7005
PeakTech® P 7005 - 2 x 4 mm safety test leads (red/black) with extension
RPI-ROBOPICO
Cytron ROBO-PICO - Designed to integrate effortlessly with the Raspberry Pi Pico and Pico W, it’s equipped with a 2-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors.
PIM634
Pimoroni PM634 - A svelte 2.9" (296x128px) mono E Ink® display for Raspberry Pi Pico / Pico W.
AIRAM-2442646
Airam 2442646 - Earthed 4-way extension cord with a switch and an indicator light. Length 1,5 meters.
PEAK-2035
PeakTech® 2035 - Digital multimeter with TrueRMS measurement and USB data logging.
PEAK-4940
PeakTech® 4940 - Infrared thermometer for temperatures from -50 °C to +600 °C.
PEAK-1635
PeakTech® 1636 - Current clamp meter with a 1mA resolution. Particularly suitable for measuring leakage currents and other small currents.
PEAK-2530
PeakTech® P 2530» 3-phase direction indicator
SHELLY-PLUS1PMM3
WiFi-operated relay switch, 1 channel 8A, with Power Metering
MSRCAWHITE290ML
Bostik Simson MSR CA 1-component fast drying structural adhesive developed for bonding and sealing applications in the marine industry
W42068
Wiha 42068 - metric, 10 segments Tailor-made for electricians.
RPI-MONITOR156
Raspberry pi RPI MONITOR156 - 15,6-inch Full HD 1080p-screen
ARD-AFX00005
Original Arduino® AFX00005 - Snap-on expansion module that enhances Arduino Opta applications by adding 16 programmable voltage inputs and 8 electromechanical relays.
PCBITE-6003
Sensepeek PCBITE-6003 - Complete set of large base plate (A4) with SQ10 handsfree probes (4 pcs) and PCBite-PCB holders (4 pcs)
RGDS1202ZE
Rigol DS1202Z-E - an affordable two-channel, 200 MHz basic scope for hobbyists and maker use.
PCBITE-6005
Sensepeek PCBITE-6005 - SQ10 handsfree probes (4pcs), Dupont-to-Dupont test leads and banana-to-Dupont test leads
RPI-MOTION2350PRO
Cytron MOTION-2350-PRO - Controller card with Raspberry Pi RP2350 microcontroller for robotic applications. The card also features 4pcs 3A DC motor controllers, 8-ch servo interface, 8-ch GPIO, 3 Qwiic ports, RGB and IO LEDs, etc.
PCBITE-6014
Sensepeek PCBITE-6014 - SQ200 200 MHz Passive 10:1 handsfree oscilloscope probe set (1piece)
WKK-50007M12BSSWBLK
Jacob 50007M12BSSW - Black M12 plastic cable glands with bending protection, thread length 8mm.
WKK-50225PA7001BLK
Jacob 50225PA7001 - Dark grey M25 nuts for cable gland.
WKK-50625PA7001BLK
Jacob 50625PA7001 - Dark grey plastic cable glands M25, thread length 8mm.
RGBAG800
Rigol BAG-800 - Instrument bag for Rigol DHO800/DHO900 oscilloscope series
RUT206
Teltonika RUT206 - is a compact industrial 2G/3G/4G (LTE) router equipped with 2x Ethernet ports, WiFi, an I/O connector block, RS232/RS485 and RutOS software for advanced networking solutions.
HACBH#TT
This product is not locally stocked. Estimated delivery time is 1-2 weeks.
PEAK-8201
PeakTech 8201 - Measuring accessories set with 4mm plugs for laboratory instruments
PR4DU22K
Teltonika PR4DU22K - Duplex LC, Multi-mode fiber
RASPBERRYPI58GBSSDKIT
Raspberry Pi 5 8GB - bundled with aluminium case, 128GB NVMe SSD and NVMe Base + power supply. Provide significantly higher performance compared to a microSD memory card
SC0230
RASPBERRY PI SC0230 - original Raspberry Pi 4 black-grey case. Easy to assemble.
PEAK-1094
PeakTech 1094 - Reliable two-pole voltage tester for 12–400 V AC/DC voltages. It is ready to use without batteries and features an LED display. The integrated acoustic warning for voltages above 50 V increases safety. The IP54 enclosure protects against dust and splashes, and the ergonomic rubber surface ensures a secure grip.
PEAK-1071
PeakTech 1071 – CAT III 600V multimeter. Equipped with an LCD display, NCV function, and LED light. Measures voltage, current, resistance, and temperature. The display changes color when overvoltage is detected.
PIM704
Pimoroni PIM704 - Extension board for connecting two NVMe SSDs to Raspberry Pi 5
ELC-DHE38128D
Elecrow 1.28" HMI ESP32 Round touchscreen for use as a user interface for any application
QOLTEC-53711
A lighter, lead-free alternative to 12V 7Ah lead-acid batteries, works with the same chargers