|
PKW-LIGHT-STP-K6-0.15-SW
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 0,15m black
PKW-LIGHT-STP-K6-2.0-BL
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 2,0m blue
PKW-LIGHT-STP-K6-2.0-SW
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 2,0m black
SHELLY-PLUG
Shelly Plug - remotely controlled WiFi socket
SHELLY-HTB
Shelly H&T black - temperature and humidity sensor, black. The Shelly H&T helps to monitor changes in humidity and temperature while helping to avoid dehydration. Connects to a wireless Wi-Fi network. Can be used in controls and automation with other devices.
ESP32-MFAIOTS3H
Cytron MAKER-FEATHER-AIOT-S3-H - Maker Feather AIoT S3 is a development platform that allows users to combine wireless connectivity to IoT devices with the ability to use artificial intelligence (AI) in devices. In this design, the connectors are soldered in place.
WKK-211111040915
WKK 211111040915 - H-1 2:1 105C 16.0/8.0mm - transparent heat shrink tube in a box, length 5m
RPI-TOF-CAMERA-MODULE
Cytron RPI-TOFC -This is a Time of Flight (ToF) camera module from Arducam, featuring a MIPI-CSI 2 connection and offering up to 4-meter measuring range with sub-2cm precision, designed and optimized exclusively for Raspberry Pi & Nvidia Jetson boards.
SEEED-114990811
Seeed Studio 114990811 - RF Explorer Near Field Antenna Kit - RF Explorer Near Field Antenna Kit is a collection of high performance set of 4 antennas designed for the most demanding RF diagnosis tasks
WKK-21111340015
WKK 21111340015 - H-2(Z) 2:1 125C 25.4/12.7mm - black heat shrink tube in a box, length 5m
SEEED-114992653
Seeed Studio 114992653 - BitMaker_V2 - JST 2.0 battery connector & 6 Grove connectors - BitMaker V2 is an upgraded credit card-sized extension board specifically designed for connecting micro:bit with a more convenient plug, supporting an extended battery.
WKK-2111142215
WKK 2111142215 - H-2(Z) 2:1 125C 1.2/0.6mm - red heat shrink tube in a box, length 10m
WKK-2111142615
WKK 2111142615 - H-2(Z) 2:1 125C 1.2/0.6mm - blue heat shrink tube in a box, length 10m
WKK-2111242015
WKK 2111242015 - H-2(Z) 2:1 125C 1.6/0.8mm - black heat shrink tube in a box, length 10m
WKK-2111840015
WKK 2111840015 - H-2(Z) 2:1 125C 9.5/4.8mm - black heat shrink tube in a box, length 5m
WKK-2132442215
WKK 2132442215 - H-2(3X) 3:1 125C 4.5/1.5mm - red heat shrink tube in a box, length 10m
WKK-21924421015
WKK 21924421015 - H-2F(YG) 3:1 135C 4.5/1.5mm - yellow-green heat shrink tube in a box, length 10m
PIM082
Pimoroni PIM082 - Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.
PIM301
Pimoroni PIM301 - Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible!
PEAK-5165
PeakTech® P 5165 - a digital lux meter designed to measure illuminance in different environments.
PEAK-1095
PeakTech® P 1095 - two pin voltage tester for DC and AC voltages from 12 to 690 volts for fast and straightforward voltage measurements. This model is TÜV/GS tested for special user safety and features an easy-to-read LED display.
SEEED-114992985
Seeed Studio 102991776 - The CANBed Elite Atmega32U4 - MCP2515 and MCP2551 CAN bus chips, Type-C, LED Indicators, External Headers, Sleek Aluminum Housing, Arduino Support
CQDBC
Vention CQDBC - USB 2.0 A/microB cable with TPE jacket, supports 2A fast charging, colour black, length 0,25m. Special adapter for USB-C devices.
KTR-5038
Kitronik 5038 - Monitor, log, and react to gathered sensory data with the Kitronik Air Quality Control HAT for Raspberry Pi.
SHELLY-PRO-1
Shelly Pro 1 - is a single-phase Wi-Fi relay that supports a maximum load of 16 A and mounts directly on a DIN rail.
PHR-3-JOHTO-UROS
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end
WKK-50220PASW
Jacob 50220PASW - Black M20 nuts for cable gland, 100pcs
WKK-50013M20BSSW
Jacob 50013M20BSSW - Black M20 plastic cable glands with bending protection, thread length 11mm. 50pcs bag
ARD-A000070
Original Arduino® A000070 - The Arduino 9 Axes Motion Shield is based on the BNO055 absolute orientation sensor from Bosch Sensortec GmbH which integrates a triaxial 14-bit accelerometer
SERVO-FTSMC4CH
Feetech FT-SMC-4CH - 4CH Servo Motor Controller for DC Motor
PEAK-4200
PeakTech® 4200 - Current clamp adapter for multimeters 200A AC, ratio 1000:1
PEAK-3433
PeakTech® 3433 - Digital wall scanner for finding wood, metal and live wires.
AIRAM-2442647
Airam 2442647 - Earthed 6-way extension cord with a switch and an indicator light. Length 1,5 meters.
AIRAM-2442644
Airam 2442644 - Earthed 3-way extension cord with a switch and an indicator light. Length 3,0 meters.
PEAK-5307
PeakTech® 5307 - digital pH meter. Suitable for measuring liquid's pH, electrical conductivity, total dissolved solids and temperature.
ARD-SHIELDLIPO
Cytron SHIELD-LIPO - a battery charger shield for Arduino Uno and compatibles
TSW202
Teltonika TSW202 - managed PoE+ switch with two SFP ports and eight 1GB PoE+ RJ45/Ethernet interfaces
SHELLY-PLUSPLUGB
Shelly Plug S - Remote WiFi socket with power metering.
MOT-MDDRC10
Cytron MDDRC10 - 10Amp 7V-30V DC Motor Driver for R/C (2 Channels)
RE11
LUMEL RE11 is a universal and functional temperature controller with 2 outputs, LED bright dual display with user friendly configuration
RUT142
Teltonika RUT142 - Industrial Ethernet Router with 1xWAN, 1xLAN, WiFi 4 AP/STA and RS232 connections. DIN rail mounting as standard.
PEAK-2795
PeakTech® P 2795» Tachometer photo-contact type with laser
PEAK-3440
PeakTech® 3440 - Digital true RMS multimeter with versatile measurement functions and graphic display. Includes BlueTooth remote control function
RPI-CM4101032
Raspberry Pi CM4101032 = Compute module 4 with 1GB ram, 32GB eMMC, WiFi
RPI-CM4102016
Raspberry Pi CM4102016 = Compute module 4 with 2GB ram, 16GB eMMC, WiFi