- control: bipolar (connector spacers so bipolar half coil possible)
 - pitch: 0.9° or 400 steps per revolution
 - body dimensions: 42 x 42 x 34 mm
 - centre hole: 22 x 2 mm
 - mounting: M3 x 4 mm (31 x 31 mm)
 - 5 x 24 mm with D-shaped shaft
 - rated current: 0,7A
 - coil resistance: 6,2ohm
 - holding force: 270mNm
 - rotor inertia: 37gcm2
 - 4 30cm wires with 6-pin connector
 
