|
BANANA PI R2 PRO
Banana Pi BPI-R2 Pro is the next generation smart router developement board from Banana Pi in 2021
SEEED 320160017
Seeed Studio 320160017 - Reliable V.S.W.R Easy maintenance Wide broadband frequency application Directional 2 Watt rating
RPI HAT-1131
Waveshare 2-CH RS485 HAT - a 2-Channel Isolated RS485 Expansion HAT For Raspberry Pi, SC16IS752+SP3485 Solution, With Multi Onboard Protection Circuits
SEEED 110061441
Seeed Studio 110061441 - reComputer J1020 v2 is a hand-size edge AI box built with Jetson Nano module, rich set of IOs, aluminum case, passive heatsink, and pre-installed JetPack System, ready for your next AI application development and deployment.
PKW-STP-SLIM-KAT6 0.1 WS
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,1m white
PKW-STP-SLIM-KAT6 0.15
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,15m grey
PKW-STP-SLIM-KAT6 0.15 WS
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,15m white
PKW-STP-SLIM-KAT6 0.25 GE
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,25m yellow
PKW-STP-SLIM-KAT6 0.5 GE
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,5m yellow
SEEED 113030001
Seeed Studio 113030001 - The NFC Shield includes an integrated PN532 transceiver module that handles contactless data transmission at 13.56MHz. You can read and write a 13.56MHz tag with this NFC Shield or enable point-to-point communication with two NFC Shields.
PKW-STP-SLIM-K6A 0.5 GN
SLIM® CAT6A Patchcords FLAT design - U/FTP shielded - 0,5m green
PKW-LIGHT-K6 0.5 GE
SLIM® CAT6 Patchcords ROUND design - U/UTP unshielded - 0,5m yellow
PKW-TOUGH-STP-K6 0.5 BL
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/FTP shielded - 0,5m blue
PKW-TOUGH-STP-K6 3.0
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/FTP shielded - 3,0m grey
PKW-LIGHT-STP-K6 0.5 SW
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 0,5m black
ELC ACS85048G
Elecrow ACS85048G - Elecrow Miniature Hand-cranked Generator is a compact hand-cranked generator that provides power for a wide range of small appliances and projects. The generator is designed to produce direct current (DC) and has an efficiency of approximately 3 volts.
SHELLY HTB
Shelly H&T black - temperature and humidity sensor, black. The Shelly H&T helps to monitor changes in humidity and temperature while helping to avoid dehydration. Connects to a wireless Wi-Fi network. Can be used in controls and automation with other devices.
ARD SHIELD3AMOTOR
Cytron SHIELD-3AMOTOR - 1.2Amp 7V-30V DC Motor Driver Shield for Arduino (2 Channels)
PR1KSG30
Teltonika PR1KSG30 - GNSS antenna with glue mount and 3m antenna cable with SMA connector.
SEEED 114990811
Seeed Studio 114990811 - RF Explorer Near Field Antenna Kit - RF Explorer Near Field Antenna Kit is a collection of high performance set of 4 antennas designed for the most demanding RF diagnosis tasks
WKK 2111242015
WKK 2111242015 - H-2(Z) 2:1 125C 1.6/0.8mm - black heat shrink tube in a box, length 10m
WKK 2111342015
WKK 2111342015 - H-2(Z) 2:1 125C 2.4/1.2mm - black heat shrink tube in a box, length 10m
PEAK 1020A
PeakTech® P 1020 A - compact and safe pocket-sized multimeter with automatic fuse and NCV voltage detection.
PEAK 1041
PeakTech® P 1041 - a compact TrueRMS digital multifunction meter that offers versatile measurement features and ease of use.
PEAK 1096
PeakTech® P 1096 - is a new development for fast and uncomplicated voltage measurements as a two-pole voltage tester with digital LCD display and additional LED display of the current voltage values. This model has been tested by TÜV / GS for special user safety and has an easy-to-read LCD display with backlight for a precise indication of the voltage...
PEAK 1010
PeakTech® P 1010 - is a practical test device in pin design, ideally suited for checking magnetic fields and the correct function of coils, e.g. Relays and solenoid valves. The magnetic field detector works without contact, so that opening the housing is not necessary in most cases.
PEAK 6227
PeakTech® P 6227 - SMPS DC power supply 0-60 V / 0-6 A with 2 x USB
SHELLY PRO 1
Shelly Pro 1 - is a single-phase Wi-Fi relay that supports a maximum load of 16 A and mounts directly on a DIN rail.
SHELLY PRO 1PM
Shelly Pro 1PM - is a Wi-Fi relay with single-phase energy consumption measurement, supporting a maximum load of 16 A and mounts directly on a DIN rail.
SHELLY PRO 2
Shelly Pro 2 - is a 2-phase Wi-Fi relay that supports a maximum load of 25 A (16 A per channel). Directly mountable on a DIN rail.
SHELLY PLUS 2PM
Shelly Plus 2PM - two channel relay switch for Wi-Fi network
FMM130
Teltonika FMM130 - GNSS and GSM connected positioning head that can collect the coordinates of the device and transmit them via GSM network to a server.
FMM230
Teltonika FMM230 - is a GNSS- and GSM-connected positioning head that can collect the coordinates of the device and transmit them via GSM network to a server. It attaches directly to the battery using the fork connectors included in the package.
WKK 27103102
WKK 27103102 - HSEC shrinkable cable end cap with glue ensures an excellent sealing of cable ends. This makes this perfectly suitable for low voltage applications.
WKK 281111201
WKK 281111201 - H-2(Z) 2:1 125C - assortment of shrink plastics in storage box, 7 different colours and sizes, 127 pieces in total.
WKK 28113101
WKK 28113101 - H-2(Z) 2:1 125C - assortment of shrink films in storage box, 9 different sizes, 465 pieces in total.
MOT MDD20A
Cytron MDD20A - 20Amp 6V-30V DC Motor Driver (2 Channels)
ESP32 DPI12532M
Elecrow DPI12532M - ESP32-C3-WROOM-02-H4 2.4GHz WiFi+Bluetooth BLE5.0 wireless module