2. DIY kits
  3. Kemo
  4. Solar charging regulator for Dual Battery 16A

Kemo

Manufacturers

Solar charging regulator for Dual Battery 16A View larger
Previous Next

Solar charging regulator for Dual Battery 16A

KEMO-M174

2 Items

In stock

Manufacturer homepage

34,50 €

Kemo M174 - Solar charging regulator Dual 16 A

To be connected between a solar panel 12 V/DC and 1 or 2 batteries in order to avoid an overload of the batteries. If 2 batteries are connected, they are charged separately from each other. The battery with lowest charging voltage always receives more charging current. With LED displays and high charging capacity: max. 2 x 8 A or 1 x 16 A.

Technical Data
Input voltagesolar panels 15 - 30 V/DC open circuit voltage, 12 V/DC rated voltage
Max. charging currenttotal 16 A (2 batteries of max. 8 A each or 1 battery connected in parallel at both outputs up to 16 A)
Connections1 or 2 batteries 12 V. If only one battery is connected then both outputs (1 + 2) in parallel (simultaneously) applied to the battery
Displaysone display per battery "battery is charging", 1 display: "all batteries charged".
CoolingIn case of currents > 4 A the module has to be screwed with the metal bottom on a heat sink with a surface of > 300 sq. cm.
FuseA pre-fuse F16 A is necessary (not included)
Switch-on voltagebattery approx. < 12,9 V/DC (± 7%)
Switch-off voltage"battery charged" ca. 14,2 V/DC (± 7%)
Own current consumption (is taken from the battery)< 2 mA
Reverse current-proof (no additional diode required)
Dimensionsca. 87 x 60 x 33 mm (with mounting bottom)

Note! Important installation instructions, please click here!

click for more info
ManufacturerKemo Electronic
Manufacturer's modelM174
Measures87 x 60 x 33 mm

Datasheet KEMO-M174

Download (304.95k)

Customers who bought this product also bought:

 
Tuo ostoskori Excel-tiedostosta (.xls) jossa on tuotekoodit ja määrät