Seeed Studio 110110110 - Mini Router/PC with Raspberry Pi Compute Module 4, Dual Gigabit Ethernet NICs, 4GB RAM/32GB eMMC, Support OpenWRT
|
Rigol RS3015N - Real-time spectrum...
SEEED 110110110
1 Item Items
In stock
Warning: Last items in stock!
Availability date:
Seeed Studio 110110110 - Mini Router/PC with Raspberry Pi Compute Module 4, Dual Gigabit Ethernet NICs, 4GB RAM/32GB eMMC, Support OpenWRT
Note! This model includes CM4 module (CM4104032) with OpenWRT pre-installed, carrier board with dual ethernet connectors, case and power supply.
The Dual Gigabit Carrier Board powered by Raspberry Pi Compute Module 4 is equipped with dual Gigabit Ethernet ports and dual USB 3.0 ports, making it suitable for soft router applications, while keeping the hardware to a minimum. We have pre-installed a Raspberry Pi Compute Module 4 with 4GB RAM and 32GB eMMC to enable fast boot-up times and a smooth overall experience. You can also replace the installed CM4 with any other CM4 of your choice!
Out of the two Gigabit Ethernet Ports (RJ45), one Ethernet Port is connected to the Gigabit Ethernet PHY of the CM4 module which is based on Broadcom BCM54210PE. On the other hand, the other Gigabit Ethernet Port is connected to Microchip's LAN7800 which is a USB 3.0 to GbE (Gigabit Ethernet Bridge). The USB 3.0 interface here is extended from the PCIe interface of the CM4 Module. Also, both ports can support speeds up to 1Gbps.
It features a variety of I/O peripherals such as MIPI CSI, MIPI DSI, micro-HDMI to connect displays/ cameras, a standard 9-pin USB 3.0 header for more USB expansion, a micro-SD card slot, and an FPC connector while maintaining a compact form factor! This board is ideal for HTPC makers, Linux developers, software router enthusiasts, and the majority of regular Raspberry Pi users.
Also, this comes included with a PC/ABS case with an Aluminum alloy on top which has a large sink in order to cool down the CM4 at extreme loads. It provides better protection as well and is suitable to be used in industrial applications.
The Compute Module 4 comes with OpenWrt firmware pre-installed out-of-the-box. This means you just need to unbox the package, take out the board, connect to your existing home network and have your own mini router!
OpenWrt is an open-source Linux operating system which runs on embedded devices/ routers. It offers more features, performance, and security than a traditional router. It has a filesystem that’s fully writable and includes a package management system. You can make use of these packages to suit your applications in various ways. Once you connect this board to your home network and access the router from a web browser, you will be presented with a beautiful and interactive dashboard as follows.
You can navigate in this dashboard, and you will have access to a bunch of features such as:
By utilizing the above features, you will have unlimited possibilities with this mini router!
Specification | Details |
---|---|
Networking | Dual Gigabit Ethernet Connectors |
USB 3.0 to GbE (Gigabit Ethernet Bridge) | Microchip's LAN7800 |
USB | 2 x USB 3.0 Ports 1 x USB 3.0 9-Pin Header |
Storage | Micro-SD Card Slot (load system Image for non-eMMC CM4 version) |
Camera | 1 x MIPI CSI Connector |
Display | 1 x MIPI DSI Connector 1 x Micro HDMI Connector |
FPC | Interface for I2C and SPI |
External Fan | Power connector for fan |
Power | 5V/3A using USB Type-C Port |
LAN7800 Industrial Temperature Range | -40°C to +85°C |
Dimensions | 75x64x21mm |
Weight | 43g |
Specification | Details |
---|---|
Processor | Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
Memory | 4GB LPDDR4 |
Storage | 32GB eMMC |
Connectivity | 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac Wi-Fi, Bluetooth 5.0, BLE with onboard and external antenna options |
Onboard Gigabit Ethernet PHY supporting IEEE1588 | |
1 × USB 2.0 interface | |
PCIe Gen 2 x1 interface | |
28 GPIO signals | |
SD card interface for SD card or external eMMC | |
Video | Dual HDMI interface (up to 4Kp60 supported) |
2-lane MIPI DSI display interface | |
2-lane MIPI CSI camera interface | |
4-lane MIPI DSI display interface | |
4-lane MIPI CSI camera interface | |
Multimedia | H.265 (4Kp60 decode); H.264 (1080p60 decode, 1080p30 encode); OpenGL ES 3.0 graphics |
Input power | 5V DC |
Operating temperature | 0 to +80°C |
Dimensions | 55 mm × 40 mm |
Production lifetime | Raspberry Pi Compute Module 4 will remain in production until at least January 2028 |
Compliance | For a full list of local and regional product approvals, please visit: www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md |
click for more info | |
Manufacturer | Seeed Studio |
Manufacturer's model | 110110110 |
Measures | 75 x 64 x 21 mm |
Weight | 43g |
Compatible | Raspberry Pi Compute Module 4 (CM4) |
Processor | ARM Cortex-A72 (BCM2711) |
Clock frequency | 1,5GHz |
Memory RAM | 4GB |
Memory FLASH | 32GB |
Network connections | Ethernet,BT,Wifi |
RaspberryPi CM4104032 = Compute module 4 with...
135,32 €
Official EU Raspberry Pi 4 Power Supply (5.1V...
15,90 €
Joy-IT RB-AlucaseP4+07FAN - This high-quality,...
24,19 €
0,35 €
3,86 €
Seeed Studio 102110497 - Dual Gigabit Ethernet...
79,22 €
0,14 €
Waveshare Mini Base Board (A) for Raspberry Pi CM4
31,69 €
Waveshare Industrial IoT Wireless Expansion...
64,01 €
0,28 €