Seeed Studio 110110205 - RPi CM4 based mini Router with custom OpenWRT firmware, equipped with 4GB RAM, 32GB storage, dual Gigabit Ethernet ports and dual USB 3.0 ports.
|
Rigol DS1104Z Plus - a four-channel,...
SEEED 110110205
1 Item Items
In stock
Warning: Last items in stock!
Availability date:
Seeed Studio 110110205 - RPi CM4 based mini Router with custom OpenWRT firmware, equipped with 4GB RAM, 32GB storage, dual Gigabit Ethernet ports and dual USB 3.0 ports.
This Mini Router is equipped with dual Gigabit Ethernet ports and dual USB 3.0 ports, making it suitable for soft router applications, while keeping the hardware to a minimum. It comes with a pre-installed Raspberry Pi Compute Module 4 with 4GB RAM and 32GB eMMC to enable fast boot-up times and a smooth overall experience.
Of the two Gigabit Ethernet Ports (RJ45), one Ethernet Port is connected to the Gigabit Ethernet PHY of the CM4 module which is based on Broadcom BCM54210PE. The other Gigabit Ethernet Port is connected to Microchip's LAN7800 which is a USB 3.0 to GbE (Gigabit Ethernet Bridge). The USB 3.0 interface here is extended from the PCIe interface of the CM4 Module. Both ports can support speeds up to 1Gbps.
It features a variety of I/O peripherals such as MIPI CSI, MIPI DSI, micro-HDMI to connect displays/ cameras, a standard 9-pin USB 3.0 header for more USB expansion, a micro-SD card slot, and an FPC connector while maintaining a compact form factor! This board is ideal for HTPC makers, Linux developers, software router enthusiasts, and the majority of regular Raspberry Pi users.
Also, this comes included with a PC/ABS case with an Aluminum alloy on top which has a large sink in order to cool down the CM4 at extreme loads. It provides better protection as well and is suitable to be used in industrial applications.
The case has long rubber feet for better stability when placed on a flat surface. You can mount this case in two ways. One is to use the keyhole slot wall mount and mount it on the wall (you can mount it in 2 different orientations). The other way is to use the 3 mounting holes and mount onto a DIN rail.
The Compute Module 4 comes with OpenWRT firmware pre-installed out-of-the-box. This means you just need to unbox the package, take out the board, connect to your existing home network and have your own mini router!
Carrier Board
Specification | Details |
Networking | Dual Gigabit Ethernet Connectors |
USB 3.0 to GbE (Gigabit Ethernet Bridge) | Microchip's LAN7800 |
USB | 2 x USB 3.0 Ports 1 x USB 3.0 9-Pin Header |
Storage | Micro-SD Card Slot (load system Image for non-eMMC CM4 version) |
Camera | 1 x MIPI CSI Connector |
Display | 1 x MIPI DSI Connector 1 x Micro HDMI Connector |
FPC | Interface for I2C and SPI |
External Fan | Power connector for fan |
Power | 5V/3A using USB Type-C Port |
LAN7800 Industrial Temperature Range | -40°C to +85°C |
Dimensions | 75x64x21mm |
Weight | 43g |
Compute Module 4
Specification | Details |
Processor | Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
Memory | 2GB LPDDR4 |
Storage | 32GB eMMC |
Connectivity | 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac Wi-Fi, Bluetooth 5.0, BLE with onboard and external antenna options |
Onboard Gigabit Ethernet PHY supporting IEEE1588 | |
1 × USB 2.0 interface | |
PCIe Gen 2 x1 interface | |
28 GPIO signals | |
SD card interface for SD card or external eMMC | |
Video | Dual HDMI interface (up to 4Kp60 supported) |
2-lane MIPI DSI display interface | |
2-lane MIPI CSI camera interface | |
4-lane MIPI DSI display interface | |
4-lane MIPI CSI camera interface | |
Multimedia | H.265 (4Kp60 decode); H.264 (1080p60 decode, 1080p30 encode); OpenGL ES 3.0 graphics |
Input power | 5V DC |
Operating temperature | 0 to +80°C |
Dimensions | 55 mm × 40 mm |
Production lifetime | Raspberry Pi Compute Module 4 will remain in production until at least January 2028 |
Compliance | For a full list of local and regional product approvals, please visit: |
click for more info | |
Manufacturer | Seeed Studio |
Manufacturer's model | 110110205 |
Measures | 75 x 64 x 21 mm |
Weight | 43g |
Compatible | Raspberry Pi Compute Module 4 (CM4) |
Processor | ARM Cortex-A72 (BCM2711) |
Clock frequency | 1,5GHz |
Memory RAM | 2GB |
Memory FLASH | 32GB |
Network connections | Ethernet,BT,Wifi |